How do I reset my genie lift?
hold the button and turn the key switch to the ON position. hold the button and turn the key switch to the ON position. (O TO 10 SECONDS, 2 IS THE DEFAULT.
How do you turn off a scissor lift?
Use the big red button to stop the machine at any time. This is the emergency shut off button, and pressing it will immediately cut the power to the battery. If you need to restart the machine after using the emergency shut off button, simply pull the button out and use the key to restart the scissor lift.
How high does a 1930 Genie lift go?
25′
The GS-1930 features a maximum lifting height of 25′ (7.79 m) and a maximum capacity of 500 lbs. A 64″ by 29″ (1.63 m by . 74 m) slip-resistant platform provides ample room for two workers — add on a 36″ extension deck to increase useable space.
Why is my scissor lift beeping?
If there is a beep after the outriggers reach full extension, then it is likely the timer module is out of adjustment. To re-adjust the timer module, located inside the control box: • Begin by turning the blue knob on the timer module, counter- clockwise to the .
How do you charge a scissor lift battery?
Connect the Lift to a Battery Charger But, there may be instances in which the charger is mounted in the lift’s rear. From here, plug the charger into an AC extension cord and plug the cord into an electrical outlet. Keep the length between the electrical cord and charger as short as possible.
Can you use a scissor lift on a slope?
Some rough terrain scissor lifts can be driven and used on slopes. If you know that you’ll have an uneven construction surface, look for one of these models. The ability to operate on sloped surfaces is called gradeability, and usually ranges from 0 to 40 percent.
Can you operate a scissor lift from the ground?
Use the scissor lift outside only when weather conditions are good. Scissor lifts rated for outdoor use are generally limited to wind speeds below 28 miles per hour. Never allow equipment other than the scissor mechanism to be used to raise the work platform (e.g., using a forklift to lift the work platform).
How do you charge a Genie scissor lift?
How to Charge a Scissor Lift: Everything You Need to Know
- Park the Scissor Lift. Ensure the scissor lift is parked in a designated work area.
- Turn the Lift-Off. Power down the scissor lift.
- Connect the Lift to a Battery Charger.
- Confirm the Charger Is Working.
- Disconnect the Charger.
How much does a Genie GS 1930 lift weight?
The Genie® GS™-1930 slab scissor lifts are easy to maneuver in tight spaces, boast quiet electric operation and are ideal for indoor and outdoor applications on firm, level surfaces….Overview.
| Specification | Value |
|---|---|
| Machine Length | 6 ft | 1.83 m |
| Weight | 3,209 lb | 1,456 kg |
What is the weight of a Genie GS 1930?
3,209 lb
Overview
| Specification | Value |
|---|---|
| Capacity | 500 lb | 227 kg |
| Machine Width | 2 ft 6 in | 0.76 m |
| Machine Length | 6 ft | 1.83 m |
| Weight | 3,209 lb | 1,456 kg |