What radio frequencies do railroads use?
Most railroads use a set of 97 frequencies between 160 and 162 MHz. Most operations are in “Conventional/Analog” mode, that means they do not usually use trunking, digital or other complicated modes. Most railfans will want to have a handheld scanner that you can use while standing line side.
What frequency does CSX use?
| CSX Radio Frequencies | ||
|---|---|---|
| 160.320 | 21 | AAR channel 14 |
| 160.230 | 24 | AAR channel 08 |
| 160.290 | 25 | AAR channel 12 |
| 161.100 | 26 | AAR channel 66 |
What frequency does BNSF use?
160.695 – BNSF crews at Drennan (Colo. Springs) facility.
What is radio frequency range?
Radio frequency (RF) is the oscillation rate of an alternating electric current or voltage or of a magnetic, electric or electromagnetic field or mechanical system in the frequency range from around 20 kHz to around 300 GHz.
What CB radio station do truckers use?
Channel 19
We’re told that Channel 17 was previously used by truckers in the I-5 corridor. Currently, the two that most pertain to drivers include Channel 9, frequency 27.065, reserved for emergency communications or for traveler assistance and Channel 19, frequency 27.185, widely known as the trucker’s channel.
What are marine frequencies?
It uses FM channels in the very high frequency (VHF) radio band in the frequency range between 156 and 174 MHz, inclusive, designated by the International Telecommunication Union as the VHF maritime mobile band.
What is the frequency range for radio on a railroad?
U.S. RAILROAD RADIO FREQUENCIES. The railroads of North America are assigned a group of 97 frequencies in the VHF band. These frequencies are in the range of 160.110 megahertz to 161.565 megahertz, in 15 kilohertz increments.
What frequency do railroads use for EOT?
These are listed without AAR channel numbers. Outside the VHF band, the railroads of North America use the frequency 457.9375 megahertz for transmissions from a train’s end-of-train (EOT) device to the train’s lead locomotive. Most U. S. end-of-train devices transmit only.
Why are AAR channel numbers included in the railroad operating timetables?
Since the various railroad operating timetables often refer to the AAR channel numbers, they are included in this list. For historical reasons, a few railroads use frequencies outside the normal 97-channel range.
What is the frequency for end of train communication?
These are listed without AAR channel numbers. Outside the VHF band, the railroads of North America use the frequency 457.9375megahertz for transmissions from a train’s end-of-train (EOT) device to the train’s lead locomotive. Most U. S. end-of-train devices transmit only.