What does the CaTCHER software do?

What does the CaTCHER software do?

The CaTCHER software is a unique animal. It improves throttle response of the engine greatly. It spools up the turbo sooner. (On average 200 RPM sooner.)

How do I update my smarty MM3?

To Update the Firmware on your MM3 device please download and install the MM3 Agent onto your windows computer. If purchasing a new SD card to use in your MM3 it must be in the size range of 2-32 GBs. The MM3 Agent will need to be extracted before you can install it onto your computer.

How do I update Smarty s3?

Go to http://madselectronics.com/download.html.

1. Select Downloads, then scroll to the bottom and download the Smarty UDC.
2. Follow the steps for installation.
3. There will now be two icons on your Desktop.
4. Plug your device into the computer.
5. At the top of the window, choose Smarty, then select Smarty Update Manager.

What is duration on Smarty tuner?

Injection Duration is the pulse width applied to the injector(s) solenoid(s) for the main injection event. It commands how long (how much time) the injector is held open and flows fuel. The unit of measure for the Duration is in Microseconds (μs). Heavy black smoke means, wasted fuel and power.

How do you unlock a smarty touch?

The Smarty Touch will come with the first VIN# license unlocked. The remaining three VIN# licenses can be unlocked purchasing unlock codes. The production of the Smarty Touch with the ability to tune four different trucks will begin the third week of March 2016.

How much HP does a smarty so3 add?

On a stock engine typical gains are 60 horsepower at the rear wheels. With upgraded injectors the Hp gain increases.

What does CaTCHER mean on a Smarty tuner?

The CaTCHER software is a unique animal. It improves throttle response of the engine, spools up the turbo sooner, on average 200 RPM sooner, deals with the injection timing, alters the torque management. And more… Customers report that the engine now ‘hangs’ on the throttle.

How do I download MM3 tuner?

MM3 Stock File Reading Instructions

1. Touch the screen to turn the mm3 on.
2. Select ECM tuning in the main menu.
3. Select ECM.
4. Select get stock file.
5. Follow the on-screen prompts.
6. Turn ignition off and remove sd card.
7. Plug sd card into computer.
8. Open up the sd card on your computer.