How do I fix Wi-Fi stuck on obtaining IP address?

How do I fix Wi-Fi stuck on obtaining IP address?

Android Device Stuck on “Obtaining IP Address”? 8 Ways to Fix It

1. Toggle Airplane Mode.
2. Forget Your Wi-Fi Network.
3. Reboot Your Android Device.
4. Reboot Your Router.
5. Change Your Device Name.
6. Check Your Router’s MAC Filter.
7. Change Your Wi-Fi’s Encryption Mode.
8. Reset Your Android Device.

Why does my Wi-Fi keep saying obtaining IP address?

If you are out of your router’s optimum connection range, your phone might find it difficult to connect to the network. Hence, the ‘Obtaining IP address’ error. You should move your phone closer to the router and check if the Android OS is now able to establish a connection with the Wi-Fi network.

How do I fix my IP address glitch?

The IP address error could have been a small glitch, which a reboot will resolve. Restarting your router and modem (if they’re separate devices) will re-assign all IP addresses via DHCP. If restarting everything doesn’t work, the problem is a little deeper.

Why does my wifi extender not obtain my IP address?

make sure you set your Wi-Fi extender on the same subnet as your router and provide your Wi-Fi extender a static IP with the gateway as your router. Also make sure that DHCP is turned off on the Wi-Fi extender and let your router provide your devices IPs.

How do I change the encryption type?

Here’s how to change your encryption type:

1. While you’re logged into your router’s settings, find the wireless network configuration section on the wireless security or wireless network page.
2. Select the WPA or WPA 2 option.
3. Click “Save” and “Apply”. You might need to reboot the router for the new settings to take effect.

How do I reset my Wi-Fi IP address?

On a Windows computer, use the following information to release and renew your IP address:

1. Go to “Start > Run” and type ” cmd ” (no quotes), then select “OK”
2. Type ” ipconfig /release ” (no quotes) and press “Enter”
3. Once the prompt returns, type ” ipconfig /renew ” (no quotes), then hit “Enter,”

What does failure to obtain IP address mean?

The “Failed to obtain IP address” error usually shows up when accessing a Wi-Fi network, whether it is new or one you have saved on your device. This error message means the router is having problems issuing an IP address to your device.

Is my home WiFi encrypted?

Click Manage known networks. Click the current wifi network your are connected to, and click Properties. Next to Security type, if it says something such as WEP or WPA2, your network is protected.