What is the difference between UniFi Lite and Pro?
Aside from being a 2×2 AC1200 class AP, the Lite has a few other differences from its 3×3 AC1750 PRO sibling to enable its $50 lower price. It has only one Gigabit Ethernet port and uses non-standard 24v power over Ethernet. The PoE injector comes with the AP and enables single cable connection.
What is the range of the u6 LR?
44 to 57VDC
Know more about your network than ever before
| Mechanical | |
|---|---|
| Dimensions | Ø220 x 48 mm (Ø8.66 x 1.89″) |
| Power supply | UniFi PoE switch 48V, 0.5A PoE adapter (not included) |
| Supported voltage range | 44 to 57VDC |
| Max. power consumption | 16.5W |
Does AC Lite come with PoE injector?
The single-pack of the UAP-AC-LITE includes one Gigabit PoE adapter. For multi-pack units, we recommend using a UniFi Switch with PoE.
How do I reset my AP Lite AC?
Follow the steps as outlined below:
- Press and hold the reset button for 10 seconds.
- Release the button (the LEDs on the UAP will stop glowing)
- Do not disconnect the UAP from its POE injector during the reboot process.
- The UAP will restore factory settings.
Is ubiquiti a WiFi 6?
UniFi 6 Lite is a 2×2 Wi-Fi 6 access point that delivers up to 1.5 Gbps aggregate radio rate with 5 GHz (MU-MIMO and OFDMA) and 2.4 GHz (MIMO) radios. Mount UniFi 6 Lite horizontally in the ceiling to cover a high-density environment, or mount it vertically on the wall to extend its range.
Can I use any PoE switch with UniFi?
Yes, I have used the UAP Pro with regular POE switches and will vouch it does work fine.
How reset UniFi UAP AC LR?
Restore to Factory Default Settings Press and hold the Reset button for more than five seconds. Alternatively, the UniFi AP may be reset remotely via a Reset button located on the bottom of the Gigabit PoE adapter.
How do you reset UAP?
Physical Reset
- Press and hold the reset button for 10 seconds while AP is connected.
- Release the button (the LEDs on the UAP will stop glowing).
- Do not disconnect the UAP from its power source during the reboot process.
- The UAP will restore factory settings.
How far apart should WAPS be?
Depends on security requirements. Distance between two APs should be approximately 30 to 70 feet. Reduce AP transmit power. APs may be ceiling or wall-mounted.