Is a 14 bolt semi-float good?

Is a 14 bolt semi-float good?

Still, the 14 bolt semi-float is a solid axle for a lot of applications. Compared to a GM 10 bolt axle (for example), a semi-float 14 bolt is a nice upgrade. You can spot a semi-float 14 bolt axle by counting the lugs (if it’s a six lug wheel, it’s a semi-float), or by looking at the wheel surface.

Is a GM 14 bolt a Dana 60?

The 14 Bolt and Dana 70 axles are Heavier Than a Dana 60 The 14 bolt axle and the Dana 70 weigh more partly because they have 3.5″ axle tubes, which are slightly larger than the 3 3/8″ tubes found on many Dana 60s.

Are all 14 bolt axles the same?

Over the years, there have been millions of 14 bolt axles produced. And, of course, they weren’t all the same. GM 14 bolt axles were available in semi-float and full-float versions, and there are two types of hubs found on 14 bolt axles. Also, two different types of drums were used.

How strong is a GM 14-bolt?

First appearing in 1973, the 14-bolt is one of the most used rear axles in the General Motors stable. Found under ¾- and 1-ton GM trucks, vans and SUVs, the 14-bolt received a max torque rating of 6,242 pounds.

Is a 14-bolt A 1-ton axle?

The 14-Bolt Is The Ford 9-Inch Of 1-Ton Trucks Every diesel-powered pickup sold in the United States for the last 10 years has a full-floating rear axle. Fords currently use a 10 1/2-inch axle made in a plant in Sterling Heights, Michigan-so most people refer to this axle as the Sterling 10 1/2-inch.

What size is the pinion nut on a 14 bolt?

10.5″ GM 14 bolt truck pinion nut. 1 1/2″ socket, 15/16″ x 16 thread.

What year is a 14 bolt A full floater?

The General Motors Corporate 14 bolt is a heavy duty, full floating rear axle used in 1973 to 2001 Chevrolet and GMC pickups.

Is a 14 bolt rear end a 1-ton?

GM’s Strong & Plentiful Axle First appearing in 1973, the 14-bolt is one of the most used rear axles in the General Motors stable. Found under ¾- and 1-ton GM trucks, vans and SUVs, the 14-bolt received a max torque rating of 6,242 pounds.

What year is a 14-bolt A full floater?

How do I identify a GM axle Dana 60?

To figure out exactly what axle you have, you can look for the Dana stamped bill of materials number. This stamped number can usually be found on the righthand side or on the longer axletube on the same side of the tube as the differential cover, facing the rear of the truck.