What does resetting Virgin Hub do?

What does resetting Virgin Hub do?

Factory reset the Hub Important tip: The Hub will return to factory settings, so if you’ve made any changes such as updating your WiFi password, you’ll need to set these up again after the Hub has reset.

Why is my virgin WiFi pod flashing?

If the WiFi Pod’s light has quick, repeating double blinks, it’s in the process of improving your WiFi. This usually takes 2-3 minutes, depending on how many WiFi Pods are connected.

Why is iPad not connecting to Internet?

Still can’t connect? Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.

How do I get my iPad back online?

Reset Your iPad’s Network Settings Open Settings and tap General -> Transfer or Reset iPhone -> Reset -> Reset Network Settings. Enter your iPad passcode, then tap Reset Network Settings to confirm. Your iPad will turn off, complete the reset, then turn on again.

How do I reset my super hub 3?

The default password is printed on the bottom of the Hub 3.0. The second way is to reset your hub by finding the Ethernet ports on the back of the Hub 3.0. Below the Ethernet points, you will see a pinhole marked ‘RESET’. Use a paper clip to press the pinhole reset button for 20 seconds.

How do I refresh my virgin router?

Reboot the Hub

1. Make sure the Hub’s power supply is firmly connected to the wall socket and back of the Hub.
2. Turn the power switch off and on again.
3. It can take 5 to 10 minutes for the Hub to fully reboot.
4. You’ll know it’s ready when the white power light at the front of the Hub is on.

How do you see what devices are connected to your WiFi Virgin Media?

Go to the Broadband tab on the Connect app. Swipe down to refresh the list of your devices.

Why is my virgin WiFi light flashing green?

Green light If the Hub flashes green slowly it means it’s downloading a software update. The Hub will take a few minutes to reboot once it’s finished downloading it.

How do I reset my wi-fi pod?

Unplug the Gateway pod from power and unplug anything connected to it by Ethernet. Plug the Ethernet cables back into Gateway pod and into the modem. Plug the Gateway pod back into power. Plug the modem back into power and wait until the modem is fully restarted and its LEDs indicate there is an internet connection.