How do I add a VLAN to a Cisco switch?

How do I add a VLAN to a Cisco switch?

Configuring Vlan using VLAN database mode:

1. Issue the “vlan database” command at the enable prompt in order to enter the VLAN database mode.
2. Issue the “vlan vlan-id> name vlan-name” command at the vlan database prompt in order to add an Ethernet VLAN and assign it a number.

How do I connect to Cisco SG350?

Click on the Use the following IP address: radio button and enter 192.168. 1.2 (the Cisco SG350 switch has a factory default IP address of 192.168. 1.254). Click on the OK button to accept the settings and close the dialog.

How to create a VLAN on SFSF/SG 200 and SF/SG 300 series switches?

SF/SG 200 and SF/SG 300 Series Managed Switches Step 1. Log in to the web configuration utility and choose VLAN Management > Create VLAN. The Create VLAN page opens: Step 2. Click Add. The Add VLAN window appears. There are two ways to create a VLAN. You can create a single VLAN or you can set a range of new VLANs.

How to assign ports to VLANs on the 200/300 series switches?

Once the VLANs are created, you need to assign the ports you wish to the appropriate VLAN. The next steps explain how to assign ports to VLANs on the 200/300 Series Managed Switches. Step 1. Log in to the web configuration utility and choose VLAN Management > Port to VLAN. The Port to VLAN page opens: Step 2.

How do I add an interface to a VLAN?

In the Filter field, from the VLAN ID Equals To drop-down list, choose the appropriate VLAN. Step 3. In the Filter field, from the Interface Type Equals To drop-down list, choose the type of interface you would like to add to the VLAN.

How to configure port to VLAN in Windows Server 2016?

Log in to the web configuration utility and choose VLAN Management > Port to VLAN. The Port to VLAN page opens: Step 2. In the Filter field, from the VLAN ID Equals To drop-down list, choose the appropriate VLAN. Step 3.