How does the light pro keeper work?

How LightKeeper Pro Works. Defective Bulb shunts cause most light set failures. Simply plug your LightKeeper Pro into the light set and pull the trigger. The LightKeeper Pro sends a pulse through the light set, finds the bad bulb, and fixes the shunt—allowing the light set to work properly.

Does Light Keeper Pro work on LED?

No, the LED Keeper uses a different technology specifically developed to perform on LEDs. Fortunately, the LightKeeper Pro is able to fix incandescent holiday lights and has the required technology for these sets.

How does Christmas tree light shunt work?

In incandescent holiday lights, shunts are small wires wrapped beneath the filament. Initially, they are coated with a substance that makes them an insulator. Now the shunt has gone from an insulator to a conductor, and current passes along shunt, keeping the circuit closed, and the remaining lights burning.

How does a Christmas light shunt fixer work?

In incandescent holiday lights, shunts are small wires wrapped beneath the filament.) Next, insert the tool into the bulb’s socket and squeeze the trigger to activate a piezo circuit. A high-energy pulse will shoot through the set and after about 20 pulses any faulty shunt should be re-activated.

How do you test a bulb with a light keeper pro?

Place the bulb in the tester making sure the two thin wires of the bulb firmly touch the metal inside the bulb tester. A good bulb will illuminate when its wires touch the contacts of the Bulb Tester.

What is a bulb shunt?

In incandescent holiday lights, shunts are small wires wrapped beneath the filament.) If a bulb’s filament breaks, the shunt redirects current through the base of the bulb, maintaining the electrical circuit. Simply plug in the light strand and remove a bulb that’s in or near the dark section.

Does the luster Pro Light work?

Definitely made my teeth whiter by several shades, even my friends and family noticed. I usually applied it every night before going to bed and saw noticeable results within a few days. The only down side is that the light dies after X amount of treatments and I still had some rinse and whitening serum leftover.

How often can you use luster whitening?

You can use the Luster Pro Light on your own schedule. Whether you apply 10-20 treatments in a single day or over the course of a full week is entirely up to you.

How does Light Keeper Pro repair shunts?

The LightKeeper Pro Quick Fix Trigger sends a shaped, electrical pulse through the defective bulb, clearing the shunt. The current can then flow through the light set completing the circuit and illuminating the other bulbs.

How does the LightKeeper Pro Light set work?

What is the LightKeeper Pro continuity detector/voltage detector?

The LightKeeper Pro Continuity Detector/Voltage Detector uses an IC (Integrated Circuit) chip to find where the flow of electricity stops. It does this by detecting the minute electrical field emanating from the “Hot” wire even when a defect has caused the lights to go out.

How many times do you pull the trigger on a lightkeeper?

We opt to try process one which is simply pull a non working bulb out and stick the socket into the LightKeeper Pro and pull the trigger 7-30 times (yes we said 30 times). Fortunately, and to our amazement, the lights flashed on the third pull and the fourth pull the strand was lit.

Can the light keeper repair burned out bulbs?

When a set has 2 defective bulbs, it becomes a nightmare if not impossible to troubleshoot. In about 15 clicks the Light Keeper is able to repair the section. At that point you just replace the burned out bulbs which is simple. I was skeptical, but I just repaired 6 out of 6 strands that didn’t light up at all.