Can you make planter boxes out of cedar?
To grow your container garden, build this DIY planter box. It requires few tools and can be accomplished in a day. Make sure to use wood rated for outdoor use, like cedar. Follow our step-by-step tutorial to make your own cedar planter box.
Should I line a cedar planter box?
Redwood and cedar planters can tolerate harsh weather without warping or splitting, but they look new longer if waterproofed. Line the entire planter with a sheet of plastic, trimming it so that it reaches but does not go over the rim.
How deep should a cedar planter box be?
You will want to dig down at least 16 inches – you could go deeper, but this is a planter box, not a fence. I find that 16 inches is plenty deep and allows concrete to penetrate and hold. Once each of your holes are dug, measure each of your posts right on prepare for cuts.
Are cedar boards good for raised beds?
Cedar lumber is often used in constructing raised beds. It offers a natural resistance to rot and insects. Eastern red cedar (Juniperus virginiana) is very rot resistant and will last for years even when in contact with soil. However, the wood is very dense and can be hard to work with.
How do you fill a cedar planter box?
Filling your raised planter box Instead, they’re designed to be filled with a mixture of high-quality potting soil and compost. Mix 2/3 potting soil with 1/3 compost, toss in a few handfuls of organic granular fertilizer, and you’ll be ready to grow!
What type of wood is needed to build a planter box?
Pressure-treated pine is also commonly used to build planters, but it has some drawbacks that natural woods do not. Pressure-treated lumber is treated with chemical preservatives to make it rot, insect and weather resistant, but these are not ideal for planters that contain edible plants such as vegetables or herbs.
How to make a wooden planter box?
1) Gather Tools. Building a planter box from wood requires basic tools such as a saw, power drill and sander. You’ll also need screws, a screen and a paint brush. 2) Select Lumber. Selecting the right lumber for your DIY planter project is essential. You’ll want treated or untreated wood that resists rot, mold and will last under outdoor conditions. 3) Plan and Cut Planter. The size of your finished planter is up to you. Use wood boards that are 5 to 10 inches wide. 4) Assemble Planter. The DIY planter box will have to be sturdy enough to hold plants and wet soil. It’s important that you fasten the boards together properly and securely. 5) Sand & Add Drainage Screen. Sand any rough edges on your planter box. If you’re considering a bare, natural wood look, give the planter an overall sanding. 6) Paint or Stain Planter Box. Protecting your DIY planter from moisture, mildew spores and UV damage will keep it looking its best. 7) DIY Planter Tips. Place your new planter in place and adjust the angle so that the box gets the correct amount of sun.
How to build a vegetable garden planter box?
– Place your new planter in place and adjust the angle so that the box gets the correct amount of sun. – Line the bottom of the planter box with a single layer of river rock or pebbles. This will allow excess water to drain and keep roots from getting waterlogged. – Fill the box about 3/4 full of potting soil. – Now it’s time to plant. Follow your selected plant’s growing instructions on soil depth. – Water thoroughly. Check to be sure the box is draining well. – Consider installing a drip irrigation system in your planter to make keeping your plants well-watered more convenient.
How to build raised planter boxes?
Preparing Your Materials! We used Cedar,which is rot and weather-resistant and generally a great choice for outdoor projects like this.