Why is my castle ESC blinking red?
Plug a battery into the ESC – If your ESC does not have a switch, hold full throttle on your transmitter before plugging in the battery. After the beeps, the green LED on the ESC will blink rapidly. If the red LED is blinking instead, reverse your throttle channel.
What does Castle Link do?
Castle Link™ ESC tuning is an essential component for customizing vehicle performance for many Castle Creations’ customers. The Castle B•LINK™ Bluetooth™ Adapter enables users to wirelessly program settings on current Castle Creations ESCs, many older models and the BEC 2.0/BEC Pro on Apple iOS and now Android devices!
Is there a user guide for Tech 2 scan tool?
Tech 2 User’s Guide The Tech 2 User’s Guide provides a comprehensive overview of the Tech 2 scan tool. Everything contained in this manual is based on the latest product information available at the time of publication. The right is reserved to make changes at any time without notice.
What is the Tech 2 used for?
The Tech 2 is designed for use by trained service personnel only. It has been developed for the sole purpose of diagnosing and repairing automotive systems with electronic controls and interfaces.
What is in the Tech 2 User’s Guide 2005?
Tech 2 User’s Guide ©2005 GM Service and Parts Operations CONTENTS I. Introduction II. Care & Cleaning III. Getting Started IV. Power Supply V. Adapters VI. Troubleshooting VII. Software 2005 Tech 2 User’s Guide i Tech 2 User’s Guide The Tech 2 User’s Guide provides a comprehensive overview of the Tech 2 scan tool.
Can the Tech 2 be used in a garage?
CAUTION: SPARKS The Tech 2 uses parts that can produce arcs or sparks. When used in a garage environment, the Tech 2 must be located not less than 18 inches (460 mm) above the floor. Please see next page…