How do I remove a corroded faucet cartridge?

Heat the corroded part of the faucet with a hairdryer if it won’t turn. The metal swells as it heats up, and this can loosen or break the bond caused by the corrosion. Again, try to turn the part with the wrench. Let the metal cool off if the part is still stuck.

How do you loosen a faucet cartridge?

The usual procedure for removing a cartridge is to unscrew the handle, and after turning off the water, pull out a retaining clip. In the best of circumstances, you then grip the cartridge stem with pliers and pull, and the cartridge should slide right out.

What is a core puller?

Core puller is an equipment that is used to pull the core sample obtained during geotechnical investigation for the purpose of studying soil property. Core samples are very important for sampling and conducting soil investigation in order to select appropriate boring methods for laying pipelines.

How do you use a cartridge puller tool?

Prepare the puller tool by backing out the screw and body nut as far as they will go. Fit the cartridge puller onto the end of the cartridge so the two tabs on the puller straddle the raised center of the cartridge and the tool fits snugly.

How do you use a Moen cartridge puller?

Now that the Moen cartridge puller is attached, you can remove the cartridge. Hold on to the handle and twist the puller back and forth, clockwise and counterclockwise, as you pull. Continue the back and forth motion until the cartridge pulls out of the valve body.

How do you remove the cartridge from a pressure washer valve?

Grip the handle of the puller, and twist the puller back and forth, clockwise and counterclockwise, as you pull straight out. Continue the back and forth motion until the cartridge pulls out of the valve body. The valve is now ready for a replacement cartridge.