What is fernox F1 used for?
Fernox Protector F1 gives long-term protection of domestic central heating systems against internal corrosion and limescale formation. It is suitable for all types of boiler, radiators and pipework systems. Protector F1 is compatible with all metals and materials commonly used in central heating systems.
What happens if you put too much inhibitor in central heating?
The simple answer is no. You can never add too much inhibitor to your central heating system and dosing it up cannot cause any damage. Adding more inhibitor is only a good thing for your system as it will provide even more protection.
Can you use too much fernox F1?
Can I overdose with Fernox Protector F1 or Protector + Filter Fluid? No, overdosing is not detrimental to the system. It is important to ensure that sufficient Protector is present in the system.
How often should I drain my central heating system?
This depends on the material your radiators are made out of, the age and type of your boiler, and the hardness of your water. The short and generally agreed upon answer is that you should flush your radiators every 5 to 6 years.
Can you overdose with fernox f1?
Can I overdose with Fernox Protector F1 or Protector + Filter Fluid? No, overdosing is not detrimental to the system. It is important to ensure that sufficient Protector is present in the system. There is a test kit and a postal testing service to check the Protector concentration.
How much Fernox do I need?
Application and Dosage. The recommended ‘in use’ concentration of Fernox F1 is 0.5%. One 500ml bottle of Fernox F1 can treat an average house with 3-4 bedrooms (100 litres). For open vented systems you will need to add the fluid via the feed and expansion tank.
What is Fernox Protector F1 265ml?
Fernox Protector F1 265ml gives long-term protection against internal corrosion and limescale formation in central heating systems. Suitable for all types of boilers, radiators and pipework systems, this product is compatible with all metals and materials commonly used in central heating systems, including aluminium.
What is ferfernox Protector F1?
Fernox Protector F1 gives long-term protection of domestic central heating systems against internal corrosion and limescale formation. It is suitable for all types of boiler, radiators and pipework systems. Protector F1 is compatible with all metals and materials commonly used in central heating systems.
How much Fernox do I add to my radiators?
The recommended ‘in use’ concentration of the product is 0.5%. One 500ml bottle will treat 16 radiators (130 litres). For open vented systems add via the feed and expansion tank. For sealed systems add via the radiator using a Fernox Injector.
What is protected F1?
Protector F1 is a blend of inorganic and organic corrosion and scale inhibitors and biocide. Fernox Protector F1 is supplied in 500ml bottles. Fernox Protector F1 is classified as non-hazardous, but as with all chemicals: Keep out of reach of children.