Why does my string trimmer keeps stalling?
A clogged carburetor is most commonly caused by leaving fuel in the string trimmer for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the engine to stall.
Why does my Weedeater keep dying?
The most common causes of a weed eater dying when throttled are fuel issues, insufficient air intake, or problems with the exhaust. You should follow the path that the fuel travels to identify the issue.
Why does my 2 stroke keep cutting out?
There is usually a special one-way valve in the fuel tank cap that allows the air to come in to the top of the fuel. The obvious effect this has on the engine is less fuel getting into the carburettor, which can contribute to the engine bogging down and eventually it will cause the engine to stop completely.
Why is my strimmer smoking?
Smoking can be caused by an overly rich fuel mixture or the presence of oil in the combustion chamber. On the more serious side, your engine may be seizing because it doesn’t have enough oil.
Why is my brush cutter not working?
Check the fuel If your 2-stroke brushcutter fails to start, the simplest explanation is that there is not enough fuel: in this case you simply need to top it up. A 2-stroke brushcutter engine runs on fuel/oil mixture, which you can buy ready prepared, such as EFCO-Mix Alkilate alkylated mixture in a 5 L can.
Why won’t my string trimmer start?
The two-cycle engine that runs your string trimmer needs three things to operate smoothly: clean fuel, air circulation and a spark. The engine won’t start if any of these elements are missing, but it may run for a short time if only the air or fuel flow is restricted.
What should I do if my Craftsman weed trimmer wont start?
Check all your nuts on case halfs too for tightness. :thumbsup: I too am having trouble with my Craftsman weed trimmer model #358.791580. IF it starts, it won’t take acceleration without dying.
How do you fix a gas trimmer that won’t run?
The gas cap on most trimmer has a small air inlet hole that allows air to enter the fuel tank, preventing a vacuum from forming as fuel sprays into the carburetor. It’s easy to check whether or not this hole is blocked — just loosen the cap and see if the trimmer operation improves. If it does, it’s time to replace the gas cap.
Why is my Craftsman snowblower stalling out?
It is a Craftsman. model no. is 536773400. Share it! Click to remove this tagging. There could be several factors, but if it will start and run for a while then the most common reason for stalling out would be some kind of fuel or incoming air restriction. . The exhaust and engine would seem okay since the unit will run if you supply the fuel.