How do I reset my Netgear ReadyNAS NV+?

How do I reset my Netgear ReadyNAS NV+?

If you have a ReadyNAS NV+, continue to hold the Reset button until “Factory Reset” appears in the status display screen (after about 30 seconds), and then release the Reset button. The factory reset takes up to 30 minutes.

How do I access the boot menu on my ReadyNAS?

To access the boot menu, follow these steps:

1. Power off your storage system.
2. Using a straightened paper clip, press and hold the Reset button.
3. Press the Power button to power on the unit.
4. Continue to press the Reset button until the status display screen shows a boot menu message.

How do I reset my ReadyNAS admin password?

You can reset your ReadyNAS Admin password by accessing http://ip_address_of_readynas/password_recovery. If you have forgotten the password recovery answer, you will need to perform a firmware re-installation to reset the admin password.

How do I reset my Netgear NAS password?

Launch a web browser and enter the URL https://ReadyNAS_IP_address/password_recovery (ReadyNAS_IP_address is the IP address of your ReadyNAS).

1. The password recovery screen displays.
2. Click the Reset button on screen to begin the process.

How do I reset my Netgear ReadyNAS 102?

To perform an OS reinstall or factory reset:

1. Power off your system.
2. Locate the Reset button:
3. Using a straightened paper clip, press and hold the Reset button.
4. While continuing to hold the Reset button, press and release the Power button to power on the system.

How do I access the boot menu on my ReadyNAS 102?

Test disk.

1. Power off your storage system.
2. Using a straightened paper clip, press and hold the Reset button.
3. Press the Power button.
4. Continue to press the Reset button until the Power button LED, USB and backup status LED, disk 1 LED, and disk 2 LED light.
5. Release the Reset button.

How do I turn off Netgear NAS?

To gracefully shut down your system using the Power button: Press the Power button. The Power LED blinks, prompting you to confirm the shutdown. Press the Power button again. The system shuts down gracefully.

What is the default password for Netgear?

When you buy a new NETGEAR router, it is configured with factory default settings. When you use the local web address www.routerlogin.com to access your router’s web interface, the user name is admin and the default password is password.