Are QL or LL fans better?

Are QL or LL fans better?

Corsair QL vs LL Fans When it comes to the QL vs LL fans, the difference is that the QL fans have more LED’s on the back side of the fan. This means that when the LED’s are illuminated, there is more light from both sides of the fan. The QL fans come with the new Lighting Node Core (Lighting Node Pro + RGB fan hub).

Is SP120 an RGB?

Corsair SP120 RGB LED PC case fans combine striking RGB LED lighting with high-pressure air delivery to make sure your rig stands out. Quiet yet imposing, the SP120 will help you finish your system with a dramatic look.

Are Corsair ml fans good?

Summary: Both of these are great fans that I highly recommend. The Noctua NF-P12 redux is cheaper and quieter then the Corsair ML120, so it is best for most situations. Noise: The both fans are silent up to 1300 rpm. The Corsair ML120 is slightly louder than the Noctua NF-P12 redux at speeds above 1300 rpm.

What are the different Corsair fans?

• iCUE SP120 RGB PRO Performance 120mm Fan.
• ML120 120mm PWM Premium Magnetic Levitation Fan — Twin Pack.
• ML120 PRO LED White 120mm PWM Premium Magnetic Levitation Fan.
• BEST SELLER.
• ML120 PRO 120mm PWM Premium Magnetic Levitation Fan.

Whats better LL120 or QL120?

As a direct comparison to the LL120, the new iCUE QL120 RGB fan goes even more down the RGB hole with 34 vs. 16 LEDs, and more lighting options as well. If the CORSAIR LL120 RGB was better as a case fan than a radiator fan, the iCUE QL120 RGB is even more so.

Are Corsair ml better than LL?

These fans are also very quiet but specs-wise the ML series fans quieter. There is no magnetic levitation feature in the Corsair LL series which is why the RPM is a bit less as compared to the ML series of Corsair fans. Gamers who are looking for better visuals always prefer to buy the LL series over the ML series.

Does SP120 work with iCUE?

Connect up to 6x SP120 RGB fans to the included iCUE Lighting Node CORE compact RGB lighting controller to create dazzling lighting patterns and effects with powerful CORSAIR iCUE software, bringing your system to life with dynamic RGB lighting synchronized across all your iCUE compatible products.

Are SP120 RGB Pro fans PWM?

A translucent low-noise 120mm fan blade, able to spin as quietly as 18 dBA, is PWM controllable between 550 and 1,500 RPM, pushing up to 47.7 CFM of air while enhancing your lighting effects.

Are ml fans quiet?

The Corsair ML120 is great when you need a fan that can run both quiet or loud and powerful. Noise: The both fans are silent up to 1300 rpm. The Corsair ML120 is slightly louder than the Noctua NF-P12 redux at speeds above 1300 rpm.

What’s the difference between Corsair QL and LL?

The QL and LL are different in that the QL have more LED’s on the back side of the Fan’s this allows for more illumination inside the case. The RPM range on the LL is 600 – 1500 RPM, The RPM range on the QL is 525 – 1500 ±10% RPM. so fairly similar there.

What do the LED lights on the fan module mean?

The LED lights green to indicate that the fan module is properly plugged into the system and operating within the expected RPM range for a given power management setting. The LED lights amber to indicate a fan fault.

What is the difference between AF and SP style fans?

The two opposite ends of the blade design spectrum are the AF (airflow) and SP (static pressure) designed fans. AF style fans have many thin blades (9-15), typically with a relatively steep angle. This is a highly efficient design to move airflow (volume) with the least amount of fan blade noise.

How many LEDs are in the Corsair SP PRO RGB fans?

SP Pro RGB Fans: 8 Individually addressed LEDs around the centre of the hub, These are 3-pin, DC-controlled fans and cannot be controlled from the Corsair Liquid Cooler fan connectors. The RGB effect is visible on both intake and exhaust. Available as 120mm or 140mm. Rated current for the fan: 0.30A.

Why do I need sp120 pro fans?

The only reason why I opted to stick with the sp120 pro fans was because of the compatibility with the node core. If you didn’t know already, the node core only allows 1 type of fan to be controlled so if you have two different fan models, you’d be only able to control one of the models with the node core.