How do I reset my TSC3 Trimble?

How do I reset my TSC3 Trimble?

Reset the Ranger 3 / TSC3 by holding the Power button down for a few seconds until the countdown appears, then release and tap the ‘Reset’ button. After you see the white screen that says ‘Bootloader’ at the top, you will then see the Red/Green/Blue/Gray vertical striped lines.

How do you unlock the TSC3 screen on Trimble?

Re: How to unlock my TSC3 controller screen connect your PC keyboard to tsc3 controller. then press ‘F1’ and press ‘ * ‘ . and it will be unlock.

How do you unlock a TSC3 controller?

The TSC3 screen should be displayed in the My Mobiler window. Use the mouse to slide the unlock button across.

How do I set the date and time on my TSC3 Trimble?

Select the job and tap Properties. Tap Units. In the Time format field, select the required time display format….To set the time and date on the controller:

1. From the desktop, tap the Search icon and enter [Date & time].
2. Select [Date & time settings].
3. Change the date and time as required.
4. Tap x to close.

Is the Trimble TSC3 waterproof?

The new Trimble TSC3 controller features a 4.2 inch, high-resolution, sunlight-readable touchscreen display, integrated Wi-Fi and Bluetooth® wireless capabilities, ruggedized bumpers and long battery life. The controller is shock, dust and water resistant for durability.

How do I charge my TSC3 Trimble?

Charging the battery Connect the AC plug for your country to the AC adapter. Plug into an electrical outlet and plug the barrel end of the AC adapter into the unit. The unit will be charged in about 3 hours.

How do I charge my tsc3 Trimble?

What is a survey controller?

Surveying field controllers. The controller running the field software is a central part of your surveying solution: you control the instruments with it, it guides your work, it manages the connections, and often you store data in the controller before moving it to the office.

Can you use a Trimble in the rain?

It can handle rain, just don’t box it up wet, let it air dry thoroughly.

Is Trimble S5 waterproof?

Trimble total stations are widely renowned for their rugged and waterproof design – each of the S-Series (the S5, S7 and S9) and the SX10 scanning total station all have an IP water rating of 5 – which is protected against jets of water spraying at the device from any angle.

When did the TSC3 come out?

Jan. 19, 2011
SUNNYVALE, Calif., Jan. 19, 2011 — Trimble (NASDAQ:TRMB) introduced today its next generation field device—the Trimble® TSC3 controller.

What is the Trimble® tsc3 controller?

The Trimble® TSC3 controller with Trimble Access™ software is a handheld field computing solution that streamlines the flow of everyday surveying work and the number of devices you need in the field.

How do I perform a clean boot on a tsc3?

Clean Booting a TSC3. Perform a Clean Boot…This is like a hard reset. WARNING: Application software installed by the customer and some licenses, settings and user data will be cleared if this function is performed! Hold down the Power key until the countdown begins and then release it to show the Power Menu described above. Tap Reset.

How do I reset the Ranger 3 / tsc3?

Reset the Ranger 3 / TSC3 by holding the Power button down for a few seconds until the countdown appears, then release and tap the ‘Reset’ button. After you see the white screen that says ‘Bootloader’ at the top, you will briefly see the Red/Green/Blue/Gray vertical striped lines. Then a gold screen appears

How do I unlock tsc3 with the controller?

After connecting to the controller open My Mobiler. If you click on the arrow on the right hand side of the Task bar, you should find and icon for opening My Mobiler. 4. The TSC3 screen should be displayed in the My Mobiler window. Use the mouse to slide the unlock button across.