How do you treat a new wood deck?

How do you treat a new wood deck?

Clean the deck with Clean & Brite, rinse well well and let it dry for a minimum of five days. Once dry, apply two coats of Internal Wood Stabilizer (IWS). IWS is a clear, watery solution that can be applied to newer wood and is a non toxic, permanent waterproofer.

What do you put in a brand new deck?

The 3 Best Deck Stains For New Decks

1. Armstrong Clark Wood Stains. Used for new wood and decks such as Pressure Treated Pine, Cedar, Fir, IPE, and other Exotic Hardwoods.
2. Restore-A-Deck Wood Stains. Restore-A-Deck Wood Stain can be applied to dry or damp wood.
3. TWP 100 Pro Series. TWP 100 Series is only allowed in 35 States.

Do you need to use deck cleaner on new wood?

Once you have determined that a newer deck is ready to be protected the first step is to wash the wood with a quality deck cleaner. The sodium percarbonate deck cleaners in the powder form are very effective and will make your job easier.

How do you finish a new deck?

How To Prep for New Smooth Wood:

1. Install wood and let weather for 1-12 months.
2. After the waiting period, you should use a wood cleaner and a wood brightener.
3. Let the wood dry for a few days after the cleaning.
4. Apply 1 Coat Only of the stain!
5. Be prepared to apply a maintenance coat in 12-18 months.

How long should new deck dry before staining?

Depending on the wood and drying conditions, you should usually wait 4 to 8 weeks after installation before staining a deck.

How long before you can seal a new deck?

30 days
DO wait 30 days before sealing a new deck. If you’ve just put in a new deck, you’re no doubt itching to finish the job by sealing it. But preservatives in the wood often require about 30 days’ dwell time before the deck can soak up the sealant. After a 30-day period, pour some water on your deck.

How soon should you seal a new deck?

DO wait 30 days before sealing a new deck. If it beads up, the wood is still too wet to seal, but if the water is absorbed, it’s ready to seal. Be sure to apply sealant as soon as the wood is ready; leaving the deck exposed any longer increases the likelihood of both ultraviolet (UV) and moisture damage.

Should I sand new deck before staining?

Sanding is more for the feel of the deck than to prepare it to accept a new stain. But sanding definitely won’t hurt anything. Ideally, applying a light wood stripper and then pressure washing in a board by board manner is highly recommended to clean the surface and open up the wood grain for staining.

When to seal or stain a new wood deck?

Most common suggestion by the manufacturer. New wood is suggested to dry since it has a high moisture content.

The wood will dry and turn gray from the exposure to the sun’s ultraviolet rays.

After 3-12 months you would need to apply a wood cleaner to remove the gray wood cells.

Let dry for 24-48 hours then apply your deck stain of choice.

Which material is best for your new deck?

Pressure-Treated Wood. Pros: This is by far the most popular option even now,being used on almost 75 percent of all new decks.

Concrete. Pros: Versatile,practical,chic,and modern when well designed,concrete is a surprisingly good deck material option.

Redwood.

Composites.

Cedar.

Grass.

Aluminium.

How long should you wait before staining a new deck?

Allow 24 hours for a power-washed deck to dry before applying a stain, and allow the stain to dry for four hours before applying a second coat if it’s needed. After staining the deck, wait a full 24 hours for the deck to dry before using it.

What kind of wood should I use to build a deck?

Wood Materials. The three common choices when it comes to wood decks are redwood , cedar and pressure-treated wood that can be made of various types of wood species.

https://www.youtube.com/watch?v=WVBBD6FVazM