How do I use my Garmin Astro 220?

How do I use my Garmin Astro 220?

Turning the Astro 220 On To turn the Astro 220 on, press and hold the Power key. The first time you turn the Astro 220 on, a message appears followed by a prompt. Thereafter, when you turn the Astro 220 on, the Garmin Logo appears, followed by the Dog Tracker page.

How do you reset a Garmin Astro 220?

To perform the master reset:

1. Turn off the Astro.
2. Press Map, Enter and Power simultaneously.
3. Wait for Astro to power on.
4. Release Power.
5. Wait for the message Do you really want to erase all user data?
6. Release remaining buttons.
7. Select Yes.

When did Garmin Astro 220 come out?

Here’s the full press release announcing the Garmin Astro 220, which is expected to ship in the second quarter of 2007. It will carry a sure to be discounted retail price of $642.84. Additional transmitters and receivers are available separately.

How do I update my Garmin Astro?

To Update a Collar:

1. Make sure your Astro and Dog Collar are powered on, in close proximity, and paired. Pairing a Dog Tracking Handheld and Collar.
2. Press DOG.
3. Press MENU.
4. Select Dog List.
5. Select the specific collar to update.
6. Select Show Info.
7. Press MENU.
8. Select Upgrade Dog Unit.

How do you put a collar on a Astro 220?

Astro 220 Handheld Dropping Collar Information when Adding New…

1. Press Dog.
2. Press Menu.
3. Select Dog List.
4. Select
5. Follow onscreen prompts to add collar.

How do I factory reset my Astro?

Restore factory settings – HD enabled Box

1. Press “HOME” button on your remote control.
2. Navigate to Settings and press “OK”.
3. Navigate to Installation Settings and press “OK”.
4. Enter your PIN to access this setting.
5. Navigate to Restore Factory Settings and press “OK”.

What collars work with Astro 220?

It works with the Garmin DC20 collars, DC30 collars, and DC40 collars. Astro 220’s do not work with the Garmin DC50 Collar. Collars are sold separately. Astro 220 handhelds are not compatible with Garmin Huntview or Huntview Plus maps, or Garmin Birdseye mapping.

How do I update my Garmin Astro 220?

Connect your Astro 220 Handheld via USB to your computer, turn it on, and run the WebUpdater software. 2. Press the DOG button to pull up the Dog Tracker Screen. If the collar is already synched to the handheld, select the Dog that matches the collar you want to update and press ENTER.

How do I pair my Garmin E collar?

With the collar off, press and hold the Power button on the collar until it emits two beeps (about 5 seconds), and then release. The status LED will flash green indicating the collar is ready to be paired….Pairing Collars

1. Touch Dog List.
2. Touch Add Dog.
3. Touch Yes.
4. Follow the on-screen instructions:
5. Enter a name for the dog.