What is AirTies AirTouch?

What is AirTies AirTouch?

AirTouch removes the complications and time required to configure the wireless network settings. The AirTouch one touch setup is easy, secure and automatic. With AirTouch it is also very easy and secure to extend the coverage of the wireless network by adding other AirTies devices and creating a MESH wireless network.

How do I configure my AirTies router?

Airties Router Configuration Instructions

1. Overview.
2. Steps.
3. Log in to your router’s web interface (usually 192.168.
4. Click the “INTERNET” tab on the left of the home screen.
5. Select “DNS Setup” on the Left.
6. Deselect “Use ISP assigned DNS Servers” (if its selected).
7. Change DNS1 and DNS2 entries. (

How do I connect to AirTouch 4?

On the AirTouch console open the Quick Menu and select System Settings > Installer > Sensors > Turn Sensor Pairing from Stop to Start. By default, the installer password is Polyaire. The zone name will appear on the sensor page of AirTouch 4 when the pairing is successful.

How do I set up AirTouch?

To connect AirTouch to WiFi (AirTouch 2 and 3)

1. On your AirTouch panel, touch User and then WiFi to enter the WiFi Setup screen.
2. If the wireless network SSID is known, touch the SSID field to display the keyboard on screen and then input first few characters of the SSID.

Is AirTies WiFi mesh good?

Overall, the AirTies WiFi Mesh network did not drop to below 30 per cent of the maximum signal strength, even at the farthest corner of my home. Verdict: Singtel’s Wi-Fi mesh solution is easy to set up out of the box. But, while inexpensive, it lacks features you would expect from standard routers.

Why do AirTies blink green?

Green light, strong-signal mesh: no action required. Red light, low-signal mesh: Move the device closer to another device in the mesh network.

How do I log into my Zhone router?

Type 192.168. 1.1 (the most common IP for Zhone routers) in the address bar of your web browser to access the router’s web-based user interface. The default username for your Zhone router is admin. The default password is admin.

How do I connect my AirTies 4920 to my router?

On the Air 4920: Hold the WPS button on the front of the device for 2 seconds. The device will now connect to the router and copy its network name/SSID and password from the 5 Ghz network. After pairing, wait for about 30 seconds for both the router and the repeater to come online.

What is Zone Touch?

ZoneTouch 3 is a touch screen controller to let you control which rooms of your home are air conditioned and prevent wasting conditioned air on rooms not in use.