Why is my HDMI not working on PS3?

Reset Video Output Unplug the power lead. Connect HDMI cable to HDMI out on PS3 and HDMI in on TV. Connect PS3 so that the red standby light is showing. Hold down the On/Off button until you hear a second beep.

How do I change my PS3 resolution to 1080p?

– Under Settings on the XMB, select Display Settings. – In the next menu, select Video Output Settings. – Now select the type of cable you are currently using e.g. HDMI. The game will now display in 1080p.

How do I get my PS3 to automatically detect HDMI?

At the same time you should have the HDMI cable connected from the PS3 to your display.

Go to settings in the XMB.
Got to Display settings.
Go to Video output settings.
Select HDMI.
Switch to your display’s HDMI channel.
Accept the setting and then choose AUTOMATIC.
Make sure you press X to save your new settings.

What are the most common error codes for the PS3?

Here is a list of the most common error codes for the PS3: 80130203 PS3 can connect to the internet but not the PSN.

How do I fix error code 8013013d on PS3?

8013013D – “A connection error has occurred” – May be to do with the SSID of the router or signal strength if the connection drops Putting the PS3 into DMZ may help – otherwise check WPA key PS3 can’t handle WPA2 only WPA or none. 8013013E – WEP Key error, change WEP key to all numbers (on router homepage) and try again, or which to WPA.

Why does my PS3 have a yellow light on?

Power Supply One cause of the PlayStation 3 not booting is a faulty power supply. A much smaller percentage of PS3 consoles will display the yellow light as a result of a faulty power supply. If the power supply is faulty, then it will need to be replaced.

Why is there no sound coming out of my PS3?

For problems with sound: Verify that the TV or audio system is not muted. Check the settings of your audio output device to make sure it “sees” the PS3. Also, verify that you are using the correct audio cables and that they are properly connected.