What is a space saver staircase?

A Space Saver Staircase is a Compact Staircase that has alternating treads allowing you to get up a flight of stairs in approximately half the going distance of a normal flight of stairs. Very popular for Loft conversions where space is of a premium.

How do you maximize the space under stairs?

15 Smart Ideas to Utilize Space Under Stairs

Create a study room/office space under stairs.
Create relaxing nook for a daytime nap.
Build a wine rack under stairs.
Use under stairs space as a closet.
Make a playhouse under stairs.
Small luxury guest bathroom under stairs.
Create a kitchenette under the staircase.

Can Trofast be used as stairs?

We bought a Trofast storage unit as a replacement for the stairs. It worked great! They could both climb up and down into the bed but to make it safer […]

Are space saving stairs legal?

* There is a type of staircase called a “space-saver” or “Paddle tread” that rises at 55 degrees, it is legal due to its design, you can see this type of stair by clicking on “Conversion types” then staircase.

How to build storage stairs?

1. Locate the studs in the wall underneath the stairs. Hold a stud finder against the wall underneath your stairs and turn it on. Slowly run it along

2. Draw boxes on your wall where you want to place your shelves. Use a straightedge as a guide to make sure your lines are straight and level when you

3. Cut through the drywall with a drywall saw. Poke a hole through your drywall with a drywall saw along the edge of one of the studs. Follow along

4. Saw pieces of plywood to match the dimensions of the openings for each box. Get enough 1⁄2 in (1.3 cm) plywood for the dimensions of your boxes so

How to build shelves under stairs?

Locate the studs on both walls under your staircase and mark their locations with chalk or pencil,drawing a vertical line as high as your shelves will extend.

Measure the heights at which you want to place your shelves and mark the heights on the stud lines.

Attach brackets to both studs and stringers with 1 1/2-inch wood screws.

How to do stairs, DIY Guide to building a stairway?

Planning. Planning a stairway mainly concerns itself with three dimensions.

Cutting Stringers. A handy add-on for your framing square is stair buttons,which allow you to make repeatable measurements quickly.

Stairway Framing. Set the stringers in place and use a short level to level the step run from front to back.

Treads and Risers.

How to design stairs?

1) Collect the Measurements. Understanding how to build a staircase starts by taking accurate measurements. 2) Calculate the Stair Slope. You will use your rise measurement to calculate the slope of the stairs. 3) Hang the Stair Stringers. 4) Install the Risers and Treads. 5) Install a Staircase Handrail (Optional)