How do I fix brother error 4f?

How do I fix brother error 4f?

Remove all ink cartridges from the printer and gently clean the contacts on the printer and cartridges. Unplug your printer and leave for 10 – 20 minutes. Plug the printer back in and wait for the message to insert new cartridges. Replacing any that are almost empty, install all inks back in the printer.

How do I delete scan unable AF?

“Scan Unable AF”

1. Remove any documents that are loaded in the ADF (automatic document feeder).
2. Turn off the Brother machine’s power by pressing the power button until “Shutting Down” appears on the machine’s display.
3. If fax jobs are stored in the machine memory, you can transfer them to another fax machine or a PC.

How do I clear a Brother printer error?

To clear these messages, follow these steps:

1. Press the ON/OFF key to turn the Brother machine off.
2. Unplug the Brother machine from the electrical outlet.
3. Wait approximately ten seconds.
4. Plug the Brother machine back into the electrical outlet.
5. Press the ON/OFF key to turn the Brother machine on.

What is init unable AF?

The message “Unable to Init. AF” will appear on the display for one of the following reasons: Any faxes received while the error message is on the display will automatically go into the machine’s memory due to the product’s inability to print.

How do I fix Brother scan unable AF?

How to Fix Brother Printer AF

1. Solution 1 Check for Printer Connection. Check whether the printer is accurately connected to the PC.
2. Solution 2 Reinstall the Driver.
3. Solution 3 Verify and Transfer Faxes in Memory.
4. Solution 4 Reconnect scanner flat cable to the main PCB (printed circuit board)

What does scan unable AF mean on Brother printer?

The message ‘Scan Unable AF’ or ‘Machine Error AF’ will appear on the display if there is a mechanical malfunction of the Brother machine or if there is paper jammed in between fuser rollers. To reset the machine, power the machine off using the power switch located on the right side of the machine.

Why is my Brother printer in an error state?

You can update or re-install the printer driver. According to many Brother Printer users, the Error State is often caused by the corrupting of the printer drivers. The technicians also suggest the same.

How do I fix brother scan unable AF?

What does print unable OB mean?

“Print Unable 0B” or “Machine Error 0B” will appear on your machine’s display if there is a mechanical malfunction of the Brother machine or a malfunction of the black drum unit. Brother strongly recommends that customers use only Genuine Brother drum units and/or toner cartridges.

What is af error?

An AF (Restricted Air Flow) error code indicates that the lint screen or house vent is clogged; the vent may be crushed, kinked or have too many turns. The dryer will continue to run when the is error is present. Touch any key to clear the code from the display and return to the estimated time remaining.