What are axle nut sockets used for?

What are axle nut sockets used for?

An axle nut socket is a tool used to remove the axle nut on front-wheel drive as well as certain four-wheel drive vehicles. This enables the wheel hub to be separated from the axle.

What size is trailer hub nut?

1″ – 14
This a Axle Castle Nut used to secure your trailers Hub and Bearings onto your Spindle. This is 1″ – 14 thread standard castle nut that will work on nearly all trailer axles. This size and thread is very standard.

What size is Toyota axle nut?

39mm
39650 39mm 12 pt Axle Nut Socket for Toyota. Removes and Installs Axle Nuts on 4WD Axle Hubs on Toyota / Lexus SUV Models. Durable, impact-grade heat-treated alloy steel. Extra deep to fit over various axle lengths.

What is the torque spec on hub assembly?

GM Automobile Torque Specifications The torque specifications for GM wheel hubs generally range between 107 to 225 foot-pounds, depending on the year and model.

Are hub nuts reverse threaded?

Yep, normal on the left…reversed on the right. Think of it this way. If you held the untightened nut with your fingers as you hit the gas, the left side would tighten and the right side would loosen (with normal threaded nuts). Yep, normal on the left…reversed on the right.

Should you replace hub nut?

Don’t Reuse the Old Nut This is typically when a one-time-use, self-staking nut secures the hub. In these applications, a new nut must always be used when installing a hub. Reuse of the old nut could potentially cause the nut to loosen during vehicle operation.

What size socket for hub nut?

Socket Sizes for PreSet Plus Spindle Nuts Hub Type FF Flat FF Keyway FL R TN TP Socket Size (6 Point) 2″ 2″ 2.75″ 3.75″ 3.125″ 4″ Superior protection and durability. For faster and easier installation, removal, and service. PRESET PLUS®SPINDLE NUT

How much torque for axle nut?

The spindle is a round piece that protrudes from the axle, holding the hub assembly in place. Tighten the axle nut with a socket and torque wrench; torque the axle nut between 15 to 20-ft pounds of torque to preload the axle bearings.

What size axle nut?

A common socket for the axle nut is 36mm, but 32 and 36 are common too. Depending on the design of the ball joint, 19 and 24mm are common sizes for the tapered stud. If you have a pinch bolt, 15mm is common for the bolt head, and 17 or 19mm for the nut.

What are the standard lug nut socket sizes?

Complete with the most popular sizes that fit most lug nuts. Set includes 1/2 inch drive socket sizes 13/16, 7/8, 3/4, 15/16 inch and 17 and 19 mm.