What should I upgrade on my k40?

What should I upgrade on my k40?

K40 laser water cooling

1. Coolant tank. Depending on where you live, it might be a good option to have a bigger tank 15-25L or more.
2. Pump. The included pump coming with the machine is good enough and will work as intended.
3. Temperatures.
4. Cooling upgrades.
5. Sealing the machine.
6. Change the exhaust fan.
7. Smoke assist.
8. Temperatures.

How do you seal a k40?

Seal your machine You can do this by adding aluminium tape, silicone sealant or hot glue in each corner and opening on the machine. Add some window rubber seal for the lid to have it air tight when closed.

What size mirrors for K40?

Perfect size for the K40 Laser Cutter and any other machine that takes 20mm mirrors. Improve your machine’s performance with this high quality replacement Molybdenum (MO) Mirror.

Can the Creality laser cut wood?

What Can It Cut? According to Creality, their laser engraver attachment is capable of engraving into a wide range of materials, including wood, paper, acrylic, aluminum, and a few other metals.

What can you do with a K40 laser?

Fun fact: One of the uses of these machines is for engraving what’s called Japanese Hanko stamps, which are popular for signature purposes in Japan, similar to how royalty has specific wax stamps for sealing letters but much more widely used. (You can create your own stamps using the K40, too.)

How to upgrade the bed of A K40 Laser Cutter?

K40 laser cutter bed upgrade 1 Removing the frame of the new bed. As a replacement I ordered a honeycomb bed – also from China – for around 30 Euros. 2 Making the bed upgrade height-adjustable. We used the same setup to cut two aluminum angles to the same height. 3 Engraving aluminum rulers on the K40.

How to use a K40 Laser power supply properly?

2: Tilt your PSU, to draw ambient temp in to the fan on top. Tilt your K40 laser power supply. Relieving the power supply from extra load is a approach you should have in mind every time adding anything to the machine. Never add lights or peripherals directly to the laser power supply.

What to do with the K40 bed?

The stock bed of the K40 is completely useless and I don’t know a single person that would actually use the clamp. So the bed need to go. As a replacement I ordered a honeycomb bed – also from China – for around 30 Euros. This is the product I’ve used: Honeycomb bed. This honeycomb structure minimizes the reflection of the laser.

What upgrades can I do with my K40?

Here i list the most common upgrades. This is a prepared kit to convert your K40 for use with LaserWeb4 and other Gcode-compatible softwares like Lightburn. This is by far the easiest upgrade with very similar results as the other ones. Seen to the price it´s #2 This is a prepared kit to convert your K40 for use with a AWC DSP controller..