What is G13 fitting?
Fluorescent G13 tube base types are a two pin fitting located at each of the tube with 13mm between the two pins. The T8 (26mm diameter) and T12 (38mm diameter) uses the G13 cap fitting. G13 tube fittings are commonly used in kitchens, garages, and office buildings.
Is G13 the same as T8?
A T8 tube is also called a TL-D tube from Philips and a Lumilux tube from Osram. You can recognize a T8 tube from it’s 28mm diameter. The socket is called G13 this because the 2 pins are 13mm apart from each other. . A T8 tube can work on an electronical ballast using a fixture without a starter.
What is the difference between G13 and G5?
G5 / G13 / 2GX13 Socket These sockets are used for fluorescent tubes. A G5 fitting for example, is made for T5 tubes, which have 5mm distance between their pins. G13 sockets have a distance of 25mm and are used to connect T8 fluorescent tubes.
What does 840 mean on a fluorescent tube?
So for example 840 means the lamp has a CRI of 80% and a colour temperature of 4000K.
What does T12 mean?
A T12 lamp (on the left in the figure below) is therefore twelve-eighths of an inch, or one-and-one-half inches (3.81 cm), in diameter. A T8 lamp (on the right in the figure below) is eight-eighths of an inch, or one inch (2.54 cm), in diameter.
What is the difference between T8 and T12?
The main difference between T8 and T12 tubes is the tube’s diameter. T12 tubes are 1.5″ in diameter while T8s are just one inch. All other things—socket sizes, lengths, distance between pins—are the same. T8 LED tubes won’t fall out if you try to install them in a T12 fixture—they’ll fit just fine.
What Colour is 865?
What colour temperature should i choose for my lamp?
| Code | Colour Temperature (in Kelvin) | Description |
|---|---|---|
| 830 | 3000K | Warm white |
| 835 | 3500K | White |
| 840 | 4000K | Cool white |
| 865 | 6500K | Daylight |
What Colour is 8000K?
Ice Blue
Converting HID color temperature (Kelvins) to Lumens (lm)
| Temp | Color | Lumens * |
|---|---|---|
| 4300K | Yellow-White | ~3,200 lm |
| 5000K | Bright White | ~3,000 lm |
| 6000K | Alpine White | ~2,800 lm |
| 8000K | Ice Blue | ~2,300 lm |
What does IP67 mean on a circuit board?
This number can range from 0, meaning no protection against dust and sand, and 6, meaning 100% protection against dust and sand. The second number after IP is for the part’s protection against liquids. It ranges from 0 to 8. IP67 equipment is the most commonly found in the connectivity market.
What is ipip67 equipment?
IP67 equipment is the most commonly found in the connectivity market. It is 100% protected against solid objects like dust and sand, and it has been tested to work for at least 30 minutes while under 15cm to 1m of water.
What is ingress protection (IP) and how does it work?
Water and dust proof connectivity products are defined by their Ingress Protection (IP) numbers. The first number after IP is for the part’s protection against solid objects like dust and sand. This number can range from 0, meaning no protection against dust and sand, and 6, meaning 100% protection against dust and sand.
What is the AMP SuperSeal connector family?
TE Connectivity has developed the AMP SUPERSEAL 1.5 series connector family to meet the increasing requirements for reliability in waterproof applications.