What is a translation pattern CUCM?
CUCM uses translation patterns to manipulate digits before forwarding a call. A translation pattern normally requires another digit analysis attempt. Translation patterns and route patterns can be used to block patterns, but the default action is to attempt call routing.
What is the translation pattern?
A translation pattern matches the dialed digits in a similar manner to the matching of a route pattern. The primary difference between route patterns and translation patterns is that translation patterns do not have a final call-routing destination (route list, gateway, or trunk).
What is Route List CUCM?
Route lists are a prioritized list of route groups that allow digit manipulation to be configured on a per-route group. A route group points to one or more devices that are selected based on a distribution algorithm (circular or top down).
What is a device pool in CUCM?
A device pool is configured with a name and a CUCM group. It includes roaming-sensitive settings and Device Mobility-related settings configured under Device Mobility Related Information.
What is a partition in CUCM?
A partition is a group of dialable patterns with similar accessibility. Any entry of the call-routing table, including voice-mail ports, directory numbers (DN), route patterns, translation patterns, meet-me conference numbers, and so on can be assigned to a partition.
What is device pool in CUCM?
What is MGCP backhaul?
MGCP PRI backhaul is a method for transporting complete IP telephony signaling information from an ISDN PRI interface in an MGCP gateway to Cisco Unified Communications Manager using a highly reliable TCP connection.
What is call Manager fallback?
MGCP fallback enables a gateway to act as local call control when the CUCM server to which the remote site phones and gateway register is offline or WAN connectivity is lost (in which case, Cisco Unified SRST kicks in and offers call control functionality).
Does a translation require a center of translation?
A translation takes a line to a parallel line or itself. A translation takes a line to a perpendicular line. A translation requires a center of translation.
What are translation and Route patterns in CUCM?
Translation Patterns in CUCM are very similar to Route Patterns, but they do not have a Call Routing destination. Route Patterns point to Route Lists or gateways, while translation patterns are used to manipulate digits. Translation patterns are used to match on patterns and manipulate digits.
How do I create a translation pattern in Cisco Unified cm?
From Cisco Unified CM Administration, choose Call Routing > Translation Pattern . Click Add New to add a new translation pattern. Click Find, and select an exisiting translation pattern. In the Translation Pattern field, enter the pattern that you want the system to match to dial strings that use this pattern.
How does CUCM prevent call-routing loops?
To prevent call-routing loops, CUCM passes digits through translation patterns for only ten iterations. Figure 12-11 illustrates the operation of a translation pattern. A translation pattern matches the dialed digits in a similar manner to the matching of a route pattern.
How do I copy and paste a translation pattern?
Step 1 Choose Route Plan > Translation Pattern . Step 2 Locate the route pattern you want to copy. See the “Finding a Translation Pattern” section . Step 3 Check the check box next to the translation pattern you want to copy. Step 4 Click the Copy icon of that translation pattern.