How do I change a polyline to a polygon in AutoCAD?

How do I change a polyline to a polygon in AutoCAD?

To Convert Polyline Objects to Polygons

1. Set the PROXYGRAPHICS system variable to 0.
2. On the command line, enter mappolylinetopolygon. Press Enter.
3. If you already had a selection set, the selected closed polylines are converted. If you did not have a selection set, select the polylines to convert. Press Enter.

How do you Draw a polygon in AutoCAD Mac?

Access Methods. Tool Set: Drafting tab > Draw panel > Rectangle drop-down > Polygon. Menu: Draw > Polygon. You specify the number of sides of the polygon and whether it is inscribed or circumscribed.

How do I change linetype in AutoCAD Mac?

To Change the Linetype of Selected Objects

1. Select the objects.
2. Right-click in the drawing area, and choose Properties from the shortcut menu.
3. In the Properties Inspector, click Linetype, and then the down arrow.
4. Press Esc to remove the selection.

How do I change a polyline to a solid in AutoCAD?

1. In the ‘3D Modeling Workspace’ select the ‘Home’ tab and in the ‘Modeling’ panel select either ‘Extrude’, ‘Polysolid’ or ‘Presspull’.
2. Select the polyline and hit ‘Enter’ and either ‘Pull’ it up to the height or type in the command line the desired height then hit ‘Enter’.

Can you convert lines to polylines in AutoCAD?

You can convert Line to Polyline using “Polyline Edit” tool of AutoCAD, using this tool you can also convert an arc or spline into a polyline. Type Y and press enter twice to convert the object into a polyline and exit this command.

What is Pedit in AutoCAD?

Edits polylines, objects to be joined to polylines, and related objects. Find. Common uses for PEDIT include joining 2D polylines, converting lines and arcs into 2D polylines, and converting polylines into curves that approximate B-splines (spline-fit polylines).

How do you turn on Ortho in AutoCAD Mac?

Fn-F8 or Cmd-L or Shift-Cmd-O Toggles ortho mode on and off.

How do you make a pentagon in AutoCAD?

Combined polygons

1. Type POL on the command line and press Enter.
2. Specify the number of sides. For the pentagon, we will specify 5.
3. Press Enter.
4. Specify the center of polygon on the viewport or workspace.
5. Enter I or C for Inscribe and Circumscribe.
6. Press Enter.
7. Specify the radius of the polygon. For example, 4.

How do I make a dotted line in AutoCAD Mac?

To make AutoCAD actually draw the lines with a dashed symbol, first zoom in closely to a line feature, then enter “Linetype” at the command prompt to open the Linetype Manager. Click the Load button, and select the specific Linetype to apply to the features.

How do you make a polyline solid?

To create and edit the shape of a polyline solid

1. From the menu, select 3D> Create Orthographic View> Cross Section/Elevation.
2. From this new elevation view, select Build> Primitive> Polyline Solid.
3. Click on one side of the rectangle to activate that side.