Where do I get my well water tested in Michigan?
If you have concerns regarding your water quality, you can request testing through the Michigan Department of Environment, Great Lakes, and Energy (EGLE), your local health department, or you can contact a private lab. EGLE’s Laboratory Services is committed to the health and safety of everyone in Michigan.
What test should be done for well water?
At a minimum, check your well every spring to make sure there are no mechanical problems; test it once each year for total coliform bacteria, nitrates, total dissolved solids, and pH levels. If you suspect other contaminants, you should test for those as well.
Can you test your own well water?
A water testing laboratory can test your well water. The laboratory will supply the sampling bottles and can help you sample your own well. Search the Division of Drinking Water’s Geographic Information System (GIS) Map to find ELAP-accredited laboratories in your area: California ELAP Certified Laboratories GIS Map.
How often should home well water be tested?
When should I have my well tested? You should have your well tested once a year for total coliform bacteria, nitrates, total dissolved solids, and pH levels. If you suspect other contaminants, you should test for those as well.
How long does it take for a well water test?
A typical inspection normally takes 1 ½ to 2 hours, and we run the water for up to an hour as needed.
How do you fix contaminated well water?
Shock chlorination is the process by which home water systems such as wells, springs, and cisterns are disinfected using household liquid bleach (or chlo- rine). Shock chlorination is the most widely recommended means of treating bacterial contamination in home water systems.
How do you know if water is safe to drink?
Water that’s safe to drink should ideally be clear with no odor or funny taste. If your tap water tastes metallic, smells fishy, or comes out cloudy, it could signal the presence of unsafe contaminants.
Is well water safe to drink?
Well water can be safe for drinking and all other household needs, as long as you make sure to test your water supply regularly and select treatment solutions in line with your results. Learn more about the well water treatment options that are available for your specific needs.
Should I get my well inspected?
Ideally, your well should be inspected every year to ensure your water is safe, and the well remains working properly. Before you buy land with a well, you may also benefit from doing a bit of research into the groundwater in your area.
Where can I get a water sample in Oakland County?
The Oakland County Health Division has water sample bottles available for detection of bacteria, Nitrate, Nitrite, Chloride, Fluoride, and Sulfate. It is recommended that you sample for bacteria, nitrate and nitrite annually. As of July 23, 2018, the Health Division lab can test for lead, copper, and arsenic.
Where can I get a water quality test?
State Lab bottles are available by calling the State Lab at 517-335-8184 to order test bottles. Call the Health Division Offices for more information about what you can test for. Depending on your location or specific drinking water concerns, there are other tests that may be recommended.
Where can I get a lead or arsenic test in Michigan?
The Michigan Department of Environmental Quality Drinking Water Lab has multiple tests available, including arsenic and lead. Link here to be directed to the website: Department of Environmental Quality Drinking Water Analysis. State Lab bottles are available by calling the State Lab at 517-335-8184 to order test bottles.
Is your private well well being tested for contaminants?
The Oakland County Health Division wants to remind private well owners about the importance of water quality. Unlike public water supplies, your well is not tested regularly for contaminants. The responsibility for testing lies with the well owner.