What kind of wood is used for boat trailer bunks?
pressure-treated pine
For wood, pressure-treated pine is the industry standard for trailer bunks. Popular alternatives are oak, cypress and other hardwoods that add even more durability. Composite boards used for patio decking are other options, but pressure-treated pine is a proven material with economic benefits.
What is the best material for boat trailer bunks?
“Pressure-treated pine is the industry standard for boat-trailer bunks,” he says, noting that hardwoods such as oak and cypress are popular alternatives to treated pine.
How long should bunk boards be?
Ideally, the bunk boards should be at least half as long as your boat and run from the stern (or a few inches beyond it) to the bow as far forward as you like. Due to shipping restrictions/cost on over-sized items, the longest bunk boards we carry are the CE Smith Carpeted Bunk Boards # CE27845 which are 7 foot long.
Why are boat trailer bunks carpeted?
Your boat trailer most likely has carpeted covered boards called bunks that protect the hull of your boat during transportation, loading and unloading of your boat. While the carpet is mildew and mold resistant, it will wear out over time.
How long should my boat trailer bunks be?
Ideally, the bunk boards should be at least half as long as your boat and run from the stern (or a few inches beyond it) to the bow as far forward as you like.
How should a boat sit on a bunk trailer?
Set boat on trailer while maintaining no less than 2″ gap between keel and tongue plate cover. The end of the bunks/rollers should be flush with transom and the boweye should reach the winch post. If this is so, the rear pivot should remain in the A-position.
How long do bunk boards last?
2-3 years
But how long do bunkie boards last? Typically, a bunkie board will last 2-3 years. Bunkie boards made of steel and solid wood last longer because they have more weight-bearing capacity and greater resistance to change than bunkie boards made of other types of materials.
What type of wood to use on trailer bunks,?
Woods that are pressure-treated are perceived as the industry standard for vessel trailer bunks. In line with this, hardwoods like cypress and oak woods are well-known alternatives to treated pines. On the other hand, those so-called composite boards like those that are specifically designed for patio decking are also now being utilized for bunks.
How to carpet trailer bunks?
1) Unbolt and remove existing bunk boards from trailer. Take the existing bunk carpet off and sand away any glue or debris before applying new carpet. 2) Measure the size of your boat bunks to determine how many rolls of bunk carpet you will need. (See “Note” at bottom for suggested measuring method) 3) You may either glue or staple your replacement bunk carpeting down. We would suggest just to staple your new bunk carpeting. 4) Before carpeting your trailer bunks take the bolts used to secure your bunks to your trailer and insert them into your already drilled out holes on your bunk board. 5) Unroll and layout your new carpet (which you have already cut to size) with the rubber backing facing up. 6) Take the newly wrapped bunk board and place it with the bottom side up one last time and use the excess carpet you have already accounted for at either 7) Place your new bunk board off to the side and repeat steps for remaining bunks.
What is a boat trailer used for?
A boat trailer is a trailer designed to launch, retrieve, carry and sometimes store boats. Contents. Commercial boat trailers. Commercial hydraulic boat trailers are used by marinas, boat yards, boat haulers, boat dealers and boat builders. Generally this type of trailer is not used for storage of the boat.
What is material for trailer bunks?
Cypress is the best all around wood to use for bunks. it is very stright grained like Fir, but holds up much better against rot. Cypress is what is used by most of the manufacturers for their trailers.