What does a Dynojet Ignition Module do?

What does a Dynojet Ignition Module do?

The Dynojet Ignition Module is an “add on” accessory for select Power Commanders. It allows you to control and adjust the ignition timing of your motorcycle’s engine. The Dynojet Ignition Module is connected to the PCIII USB with it’s built in expansion port link and communicates via a CAN interface.

How does Power Commander AutoTune work?

Once installed, the AutoTune kit monitors the air/fuel ratio. It then sends this information to the Power Commander V and automatically corrects it as you ride, letting you feel the changes as they happen.

How do I reset a Power Commander 5?

They only last about 10 minutes.

1. Under “Tools” menu, select the “Environment Options” menu.
2. The “Environment Options” dialog opens.
3. At the bottom of the Environment Options box, the “Reset Power Commander” button will now appear.
4. Click the “Reset Power Commander” button.

How do I add maps to Power Commander 3?

Clicking on the “Open Map File” button will bring up this window. Click the map file you wish to open. The notes for that map file will be displayed in the lower notes area. After a map file is opened, click on the “Send Map” button to send the map to the Power Commander.

Does dynojet increase horsepower?

It usually will improve drivability, throttle response, and mid-range horsepower and torque. This will often give an increase in overall horsepower.

What does a motorcycle ignition module do?

A motorcycle ignition system’s main purpose is to create the spark, which ignites an air/fuel mixture within the motorcycle engine.

How much HP will a Power Commander add?

The Power Commander is a tuning tool to adjust fuel, and on some models ignition timing. Just adding a Power Commander to a completely stock vehicle usually does not increase peak horsepower. It usually will improve drivability, throttle response, and mid-range horsepower and torque.

What does dynojet target tune do?

Dynojet Target Tune is an optional accessory for Power Vision that adds a new dimension to Harley tuning. Target Tune incorporates closed loop fuel control utilizing Bosch wideband O2 sensors into the HD-Delphi ECM.

Where can I get a Power Commander map?

To install a map on a Power Commander V fuel tuner, you will need to download the Dynojet Power Commander software using a Windows computer (or a Mac running Windows). Once you install the software, it is easy to download maps from the Dynojet.com website.

What is the PCV map switch and how does it work?

Designed for use with our Power Commander V fuel tuner, the PCV Map Switch gives you more control over how you ride. If you’re looking for an easy way to switch between a full power map and a fuel economy map (or any combination of two saved maps), this is the solution.

How do I switch between power map and fuel economy map?

If you’re looking for an easy way to switch between a full power map and a fuel economy map (or any combination of two saved maps), this is the solution. The Power Commander V is a unique fuel tuning device because it can monitor and maintain your air/fuel ratio without directly changing the ECU.

How do I select between two maps in the PCV?

The PCV can have a toggle switch connected to it to select between two maps stored in the PCV. If there was a map for toggle switch position 2, you would see a folder for that map as well. Within the Map Switch Position folder is the Primary Module folder.

How do I open a map in the power commander?

If there is a map stored in the Power Commander, it may automatically open identified as Device Network in the map box on the left. 14. Click the Get Map button in the Control Panel. This will only open the map that is stored in the Power Commander and the map file will always be identified as Device Network.