How much do float pods help?

Our Flotation Pods not only increase the plane of your boat, but also offer up to 200 LBS. of extra flotation. This extra flotation helps to off-set the negative performance often associated with the extra weight of a conventional 4-stroke air-cooled motors.

Do float pods slow you down?

the bottoms will have to be angles upwards or the pods will drag and slow you down…plus make it harder to get the bow up when you want it…. your motor is quite a bit heavier than mine…

What do transom pods do?

The pods extend beyond the transom and add extra floatation to lift the back end up out of the water which is the heaviest part of the boat. Reduces how far the transom of the boat sits in the water helping to compensate for the weight of the outboard motor and batteries.

Do float pods make a boat more stable?

Add flotation pods for buoyancy and stability One way to make your Jon boat more buoyant is to use boat stabilizers on the boat. One of the best stabilizers you can use are flotation pods which you can attach to the stern of your Jon boat. This also has the effect of greatly stabilizing the boat.

Can I float with my period?

Yes, you can float while menstruating. Just treat it like going to a swimming pool while on your period. Pro tip: if you happen to be using a tampon, consider coating the string with petroleum jelly (provided in the room) to prevent salt water from wicking into the tampon.

How do you make a boat sit higher in the water?

Ways to Add Buoyancy to a Jon Boat

Add flotation pods.
Move some of the heavier items to the front.
Add PVC tubes.
Built-in air cavities for buoyancy.
Adding buoyancy using foam.

Do float pods work on a boat?

Flotation pods are available to be added to any 52″, 60″ and 72″ models. Pods help boats get up on plane faster, provide extra flotation and allow for easier access into the boat. Add an additional stainless steel swim ladder for easier access into the boat.

What are the flotation pods?

What size transom pods do I need for my Boat?

Transom pods for mounting behind a center u-shaped tube are 6′ x 23″ x 25″ for long shaft (20″) and extra long shaft (25″) motors are available. Transom pods mounted behind various lengths of u-shaped center tubes can support a center transom tube combo to various lengths of boats.

How do you bolt the pods to the transom?

Bolting the pods on is also an option. The customer will have to cut a hole in the top of the pod to gain access. Then bolt through the transom with a minimum of 4 bolts, one in each corner. Fender washers should be used on both sides and silicon caulking used to seal bolts.

How much does it cost to add a transom to a boat?

Transom pods mounted behind various lengths of u-shaped center tubes can support a center transom tube combo to various lengths of boats. Custom built transoms can be added to tubes for $700 for up to 120 hp motors or $800 for up to 200 hp motors. I also have all the materials to build pontoon boat decks/docks.