How do you use a robinair air conditioner?

How do you use a robinair air conditioner?

Starts here18:45How to use the Robinair 34788 Air Conditioning Recovery MachineYouTubeStart of suggested clipEnd of suggested clip56 second suggested clipOkay the first thing we want to do is go ahead and power the machine on the on button is right here.MoreOkay the first thing we want to do is go ahead and power the machine on the on button is right here. And it’ll go through a warm-up. Or it’ll check all the sensors. And do a self-diagnostic check.

How do you inject robinair 34788 oil?

Starts here0:48Robinair 34788 NI Charge – YouTubeYouTubeStart of suggested clipEnd of suggested clip37 second suggested clipPress charge entering a VIN number is optional. Press the hot key to skip this step. At this screenMorePress charge entering a VIN number is optional. Press the hot key to skip this step. At this screen you may enter the charge amount the amount of oil to charge and the side you want to charge.

How do I refill my robinair?

Starts here1:15Robinair 34788 NI Tank Fill ISV – YouTubeYouTubeStart of suggested clipEnd of suggested clip60 second suggested clipIn order to fill the internal storage vessel or ISV. You need to position the source tank on theMoreIn order to fill the internal storage vessel or ISV. You need to position the source tank on the rear of the machine so the liquid refrigerant is supplied to the connection.

How do you change the filter on a robinair drier?

Starts here2:07Robinair 34788 NI Filter Replace – YouTubeYouTubeStart of suggested clipEnd of suggested clip54 second suggested clipHang the shroud on the back of the machine by placing it and the detents as shown. Here remove theMoreHang the shroud on the back of the machine by placing it and the detents as shown. Here remove the filter by turning it counterclockwise.

How do I use my robinair cooltech 700?

Starts here5:57How to Use the RobinAir A/C Machine – YouTubeYouTube

How do I calibrate my robinair air conditioner?

To check and calibrate the unit’s scale:

1. Remove the tank from the platform.
2. Press the TARE button (see page 4) until the display reads “00.00.”
3. Press the TARE button once more.
4. Place a known weight on the scale.
5. If the display does not, recalibrate the scale.

How do I calibrate my robinair?

How do you purge air from robinair 34700z?

Locate the control panel on the front of the machine. Press the “Menu” button. Press the up or down arrow to scroll through the menu and select “Change Filter.” Press the “Start/Yes” button. The machine will begin to clear the filter.

How do I change the oil in my robinair vacuum pump?

Remove the OIL FILL cap (plastic plug directly in front of the handle), and add oil until oil just shows in the bottom of the sight glass. The approximate oil capacity of the pump is 15 ounces. 3. Replace the OIL FILL cap, and remove the cap from one of the inlet ports.

What does a robinair do?

The Robinair 17800C can recover, recycle, evacuate and recharge multiple refrigerants, all in one fast and continuous operation through one hook-up. Recover, recycle, evacuate and recharge R-12, R-134a, R-22, R-404A, R-407C and many other medium-pressure and high-pressure refrigerant blends.

How do I use cooltech 34788?

Starts here6:18Robinair 34788 Set Up Operation Part #2 – YouTubeYouTube

What is air purge on a C machine?

An air purge system is used to flush electrical control equipment with clean air before it is turned on. This ensures that the functionality of the equipment is not affected or damaged by the contaminants from the surrounding environment.