What transmission does a 2010 Ram 2500 have?
Primo Hauler: We get wheel time with the new Dodge 2500 and 3500 pickups
| 2010 Dodge Ram HD 2500/3500 | |
|---|---|
| GENERAL | |
| SAE horsepower | 350 hp @ 3000 rpm |
| SAE torque | 650 lb-ft @ 1500 rpm |
| Transmission | 545RFE 5-speed automatic |
What transmission is in my 2010 Ram 3500?
There is only one transmission choice: the five-speed automatic 54RFE, with a 0.67:1 overdrive fifth gear for easy cruising. Compared with the Cummins, the Hemi has more snap, more immediate response to throttle, and a wider, more flexible operating range.
What transmission does my Ram 2500 have?
The Dodge Ram 2500 was equipped with the A618 (47RE), or the 48RE in high-output Diesel models. The later model Ram 2500 Diesel has the 6-speed 68RFE.
Is the 68RFE a good transmission?
Overview of the 68RFE: Despite all of the impending doom the 68RFE and it’s abysmal valve body bring forth, it is a powerfully reliable transmission after being properly built. But, in stock form, it cannot hold much more than factory power.
What transmission is in a 2010 Dodge Ram?
4 & 5-speed automatic
2010 Dodge Ram Pickup 1500/Transmission
What transmission is in a 2011 Ram 2500?
Ram 2500 comes standard with the 5.7-liter Hemi V8 and 5-speed automatic, no manual is offered; the Cummins 6.7-liter Turbo Diesel is optional with a 6-speed manual or 6-speed automatic.
Why does the 68RFE fail?
The most common failure point of the 68RFE is the Overdrive clutches. Because of their lack of mass, the 68RFE clutches have a very low tolerance to heat and do not dissipate it well. Once these clutches heat up past a certain temperature, they begin to distort.
What is the 68RFE transmission?
The 68RFE. The 68RFE transmission is the big brother to the 45/545RFE transmission. The RFE platform was originally designed by Chrysler and was introduced in 1999 with the debut of the new Jeep Grand Cherokee. “RFE” stands for Rear-wheel drive Fully Electronic control.
Which Cummins has the Aisin transmission?
Aisin vs. Aisin: The Aisin 6-speed automatic is one of the transmissions available with Ram’s 6.7L Cummins turbo-diesel engine.
What kind of engine does a 2010 Cummins have?
4th Gen 6.7L Cummins Years: 2010-2018: Engine Design: Inline 6 Cylinder: Block: Cast Iron: Cylinder Head: Cast Iron: Displacement: 6.7 Liters or 408 Cubic Inches: Bore: 4.21″ (106.9 mm) Stroke: 4.88″ (124 mm) Compression Ratio: 17.3:1: Firing Order: 1-5-3-6-2-4: Fuel Injection: Bosch CP3 High Pressure Common Rail System 29,000 PSI: Turbocharger:
What kind of engine does a 2010 Ram 2500 have?
2010-2018 Ram 2500 & Ram 3500 Specs & Info The 6.7L Cummins engine was added to third generation Ram HD trucks in years 2007.5-2009. It added power and helped Ram comply with upcoming emissions standards. 2010 marked the beginning of the 4th generation Cummins which continued until 2018.
What kind of transmission pan does a Cummins Cummins have?
BD-Power Deep Sump Transmission Pan 07.5-18 6.7L Dodge Cummins 68RFE 1061525 BD-1061525 30.00 BD-Power 1061525 The Dipstick Mounting Kit for auto trans equipped trucks attaches the AT dipstick tube back to the engine allowing the tube to move with the engine under torque as it was designed to do.
When did the 4th generation Cummins come out?
4th Gen Cummins Specs, information, and HP/TQ Numbers! The 6.7L Cummins engine was added to third generation Ram HD trucks in years 2007.5-2009. It added power and helped Ram comply with upcoming emissions standards. 2010 marked the beginning of the 4th generation Cummins which continued until 2018.