Can I put a bigger blade on my miter saw?
Yes, you can use a 10 inch blade on a 12 inch miter saw, provided the arbor (where the blade attaches to the saw) will fit the blade. You should never use a larger blade than your saw is designed for.
What saw blade for plywood?
Cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade. You can use a 40-tooth to 50-tooth general purpose blade as well. Joinery work: Use a 40-tooth to 50-tooth all-purpose combination blade.
How often should you change a miter saw blade?
They can last between 12 and 120 hours of continuous use, depending on the quality of the blade and material they’re used to cut.
Can you put a smaller blade on a miter saw?
Yes you can. The only real difference, besides maximum cutting depth, is that smaller blades are often thinner and have a narrower kerf. I was curious if this could make them unsafe to run at the same speed as a larger blade, but actually the opposite is true.
Can you use a 7 inch blade on a 10 inch saw?
Cutting Depth If you’re using a 7-inch blade in a 7 ¼ inch saw, or a 9-inch blade in a 10 inch saw, then the effect will be minimal. However, toss a 7 ¼ inch blade on a 10-inch saw and you might not be able to cut through your workpiece.
Can you put an 8 inch blade on a 10 inch miter saw?
As long as the diameter of the arbor hole on the stacked dado blade set matches the arbor diameter of your table saw or radial-arm saw—and the arbor is long enough for a dado blade—you can use an 8-inch dado blade on a 10-inch table saw.
What size is a Nobex miter saw?
The Nobex Champion Miter Saw is a commercial-quality saw that handles up to 7″ maximum thickness, and 7″ width at 90° or 5″ width at 45°. The table is 20″ long x 4-1/2″ wide, and is grooved to support stock leaning against the fence for compound miters.
What is the best miter saw for cutting aluminum?
Die-cast aluminum tables and light-weight, bowsaw-style cutting assembly allow quick, precise set-up, very large capacity & very smooth cutting. The Nobex Champion Miter Saw is a commercial-quality saw that handles up to 7″ maximum thickness, and 7″ width at 90° or 5″ width at 45°.
Are Nobex tools any good?
Quote. Nobex is based in the north of Sweden producing some of the best tools for the carpenter, tradesperson or cabinet maker. Since the 1980’s Nobex have fully refined the mitre saw, for example, whereby the accuracy can be guaranteed to a startling 0.08 of a degree.