Can I use my steering wheel controls with an aftermarket stereo?
This subject is a little complicated, but the basic answer is that, no, you can’t connect steering wheel audio controls to an aftermarket radio without an adapter. In most cases, though, an adapter is required.
How do I program my SWI RC 1?
Programming The Vehicle Version # 1. Press and hold programming button on the side of the SWI-RC, and turn the vehicle ignition to the ON position while still holding the button. The LED on the SWI-RC will turn on. Release the programming button and the LED will turn off.
What does SWC input mean?
What is a SWC interface? SWC is an acronym standing for Steering Wheel Control. An SWC interface is a module that connects a vehicle’s OEM steering wheel controls with an aftermarket headunit or radio replacement unit.
How do I reset my SWI RC?
A. The interface can be reset, when not connected via USB, by pressing and holding the programming button on the side of the interface for seven seconds until the LED turns amber. This reset can only be done while the module is connected to the vehicle.
How do I reset my PAC SWI RC 1?
The interface can be reset, when not connected via USB, by pressing and holding the programming button on the side of the interface for seven seconds until the LED turns amber. This reset can only be done while the module is connected to the vehicle.
What color is SWC wire?
SWC Interface Wiring Each interface (either stand-alone or as part of a multi-function product) has one blue/yellow wire and one black wire with a stereo-type 3.5mm plug. Both wires accomplish the same purpose: transfering the SWC signals to the radio.
Can I use my steering wheel radio controls with Pioneer stereo?
You want to install a Dual, Jensen, Pioneer, or Sony stereo in your vehicle, but you hate to give up the convenience of your factory steering wheel radio controls? No problem. PAC’s SWI-PS interface allows you to use the steering wheel controls in a wide variety of vehicles to command your new Pioneer or Sony radio.
How do I connect the SWI-PS to my car?
Installation is straightforward -connect a few wires, then program the adapter for your particular car and your stereo, and you’ll retain the convenience of your steering wheel controls. The direct connection to the stereo means there’s no need for an infrared emitter, allowing the SWI-PS to function even in bright sunlight.
What year did the steering wheel control interface come out?
Steering Wheel Control Interface Year (s) Model 1996-2004 CL 2013-2014 ILX 1992-2001 INTEGRA 1992-1995 LEGEND
What is the SWI-PS interface?
PAC’s SWI-PS interface allows you to use the steering wheel controls in a wide variety of vehicles to command your new Pioneer or Sony radio. Installation is straightforward -connect a few wires, then program the adapter for your particular car and your stereo, and you’ll retain the convenience of your steering wheel controls.