Can you put self leveler over concrete?
In fact, if you’re planning to install new flooring over the slab, then you shouldn’t. A user-friendly, self-leveling compound from CTS Cement | Rapid Set, the Concrete Leveler spreads across uneven slabs, filling in low spots as it goes along and creating a new, level surface in the process.
Is self leveling compound the same as concrete?
Self-leveling concrete is a type of cementitious mixture that looks and functions much like traditional concrete. Unlike concrete, however, the material flows much easier and sets up faster. Mixed with water, self-leveling concrete is pumped or poured and then spread evenly using a gauge rake.
Do you need to prime concrete before leveling?
It is recommended that the concrete surface is primed with a primer before applying the leveling compound. This is meant not only to improve adhesion with the leveling compound but also to serve to seal the concrete slab beneath.
Can you put epoxy over self leveling concrete?
Another huge benefit to using epoxy for a self-leveling overlay is the fact that epoxy itself is a sealer. In theory, assuming your floor doesn’t require more than one coat of epoxy self-levelling overlay, you could do one coat and your floor would be level, sealed and the colour you want.
Can you paint over leveling compound?
Unlike traditional surface levellers it can also be painted over. It comes as a liquid and powder which you then mix to create a pourable product.
Can you polish self-leveling compound?
Using a polishable self-leveling concrete overlay is an excellent option for creating a high-shine polished concrete floor. Polishing self-leveling concrete overlays normally does not require the addition of another layer of product other than a protective top coat.
Does self-leveling concrete need sealing?
A self-leveling overlay is a blend of special cements, fine aggregate, polymer and superplasticizer designed to go down in a thin, durable, smooth layer hard enough to be used as a wear surface that doesn’t require covering by another flooring material.
How thick can you go with self leveling concrete?
The screed coat should be around 2” / 5 cm thick, but you can adjust it to your needs (it should always be thicker than 1” – 2.5 cm). If you find it too expensive to use self-leveling screed, then you will have to make a semi-dry mix of 1 parts cement with 3 part sharp sand (grade A).
How to make self leveling cement?
1) Measure out the area that will be covered with the concrete slurry. 2) Consult the directions on your brand of self-leveling concrete mix, and determine the ratio of mix and water to be used in the slurry. 3) While adding the dry mix into the water, stir the slurry with a mechanical stirring device. 4) The mixed slurry may now be utilized in your project.
What is the maximum thickness for self leveling cement?
What is the self leveling concrete maximum thickness? Most brands and types of self-leveling concrete are rated for pours between 1/8th inch and 1/2-inch. However, some specialized compounds can pour as low as 1/25th inch or as thick as 5-inches. Your maximum thickness will depend on brand, style, subfloor condition and area coverage size.
How to use self leveling concrete?
Prep&Clean The Floors. Floor preparation is very important. Floor leveler sets quickly so everything has to be ready once you mix the compound.