Can you use a router on Hardie board?
Simple answer. NO!!! Durock is a concrete board, and a standard router bit won’t do anything but dull immediately. Just score it with a knife and crack it just like you would with drywall.
How do you cut a hole in Hardie backer board?
You can also cut holes using a jigsaw with a metal-cutting blade or a drill fitted with a carbide-grit hole saw. When using a jigsaw to cut a round or square hole, start by drilling a hole through the backer board with a 3/8-inch-diameter masonry drill bit. Then insert the jigsaw blade into the hole and start cutting.
Can you use a router on fiber cement?
This solid carbide bit delivers good cutting performance on fiberglass, tile, fiber cement, drywall, epoxy resin and other abrasive material. CMT router bits offer you reliable cutting performance at a cheap price.
Can you cut backer board with a jigsaw?
A jigsaw can cut straight cuts, rounded cuts, and is the best choice if you need to cut a circular piece or an irregular shape out of the cement board. Fit the jigsaw with a metal-cutting blade or a carbide-grit blade.
How do you cut a hole in fiber cement siding?
Cement fiber siding (CFS) can be drilled, nailed and cut much like wood. Since it is more abrasive than wood, carbide or diamond blades are best for cutting. Holes are easy to make with an electric drill and a carbide tip drill bit. As with any project, good eye protection is recommended.
What kind of blade do you use to cut Hardie board?
For a larger project, use a fiber cement saw blade with polycrystalline diamond tips; if you’re installing Hardie siding on a shed or other small building you can use a fiber cement saw blade with carbide tips. For installations with more or longer cuts, the carbide blade will burn out much more quickly.
Can you cut cement board with a hand saw?
While power saws make it a lot easier, it is possible to cut ​cement boards by hand.
Can you drill into James Hardie siding?
Manufactured by James Hardie, HardiePlank siding is a fibrous cement-based product. Although the siding does not require drilling pilot holes, you may need to run wire or cable through the siding, necessitating drilling a hole.
Can you drill through Hardie board?
It can be cut and drilled just like wood. However, drilling through cement-fiber siding goes better if you use a carbide drill bit, as opposed to a regular steel drill bit. Cement-fiber siding can be drilled while installed on a house or prior to installation.
Will a metal blade cut Hardie board?
Carbide-tipped blades are made specifically for this kind of work. You can use a jigsaw, table saw or circular saw, or another tool, as long as it’s equipped with the right kind of blade. Once prepared, cut the Hardie board as you would any other material.