Can you use Dipetane in petrol?
(Petrol, Diesel, Kerosene). There are 20 marked divisions on the side of the 1 Litre bottle, each division treats 10 Litres of fuel. There is no danger from overdosing. Dipetane works in all engines, all boilers and in all fuels at a ratio of 1:200 and is self mixing.
Is Dipetane a diesel or petrol?
Dipetane is a 100% hydrocarbon fuel treatment that enables gasoline, diesel, biodiesel, ULSD, kerosine, heating oils and bunker fuels to burn more efficiently, hence improving fuel economy while reducing emissions output.
What is Dipetane fuel lubricant?
The Dipetane 1ltr Fuel Additive contains nothing that is not already in the fuel. This additive gives up to 10% better fuel consumption and up to 25% lower car emissions! It also cleans fuel injectors and protects them against low sulphur and poorly combusting fuel!
Does Dipetane really work?
My analysis is simply summarised: Dipetane does appear to result in an increase in fuel efficiency of approximately 4.5-15% in most instances. That is, vehicles using Dipetane appear to travel further on the same quantity of fuel than those not using Dipetane.
Is Dipetane good for diesel engines?
Dipetane upgrades your fuel causing less engine friction and reduces maintenance of injectors and DPFs (Diesel Particulate Filters). It also cleans your engine lowers dirty emissions, better for the environment and improves fuel economy when used on a monthly basis.
Can I use too much Dipetane?
There is no danger from putting in too much Dipetane. Dipetane is designed for continuous use.
Where is Dipetane made?
Dipetane fuel treatment’s popularity is spreading among UK motor factors, as the product’s success in its native Ireland at reducing vehicle emissions and increasing efficiency is being put to the test following changes to the UK MoT emissions test earlier in the year.
Is Dipetane good for DPF?
Protecting your DPF through the use of Dipetane is the best way to prevent DPF damage or build up. Dipetane treated fuel has a unique ability to burn carbon more completely compared to all standard fuels meaning that much less unburnt carbon enters the DPF and therefore the regeneration occurs less often.
What is dipetane fuel lubricant?
The result is increased energy release and a longer. Dipetane fuel lubricant is suitable for all engines. It’s a 100% hydrocarbon liquid fuel treatment as opposed to an additive. This unique fuel treatment technology results in increased fuel efficiency, minimal carbon deposits and reduced emissions.
How do you mix dipetane in a diesel engine?
Dipetane works in all engines, all boilers and in all fuels at a ratio of 1:200 and is self mixing. No agitation is required. Put the fuel in first and then pour the Dipetane into the fuel at a ratio of 1:200. Additives are products that do not occur naturally in fuel and are ‘added in’.
What is a 1 litre bottle of dipetane?
Dipetane is a NON ADDITIVE Fuel Treatment. It is a pre-combustion fuel treatment. The self mixing rate is always 1:200. That is, 1 Litre of Dipetane treats 200 Litres of any fuel. (Petrol, Diesel, Kerosene). There are 20 marked divisions on the side of the 1 Litre bottle, each division treats 10 Litres of fuel. There is no danger from overdosing.
What is directdipetane and how does it work?
Dipetane claims to allow the fuel to be burned more completely by enhancing the interaction of the fuel with oxygen contained in the air. The arguments presented pertaining to the problem to be solved by Dipetane are certainly very consistent with the scientific consensus in the international combustion research community.