Do LED downlights need to be fire rated?
It is highly recommended that all downlights installed are fire rated. This is purely for your protection in your home, as they give you more time to escape a fire and help slow the fire spreading through floors.
What size cable do I need for LED downlights?
For power sockets you’ll need 2.5mm and for downlights you’ll need 1mm or 1.5mm. Twin & earth cable which is available in various sizes. Known as 6242Y cable, it is used primarily for domestic wiring of switches, sockets and lighting. For power sockets you’ll need 2.5mm and for downlights you’ll need 1mm or 1.5mm.
What does fire rated mean on downlights?
A fire rated recessed light (downlight) is a product that restores the fire integrity of a ceiling once the hole has been cut for the light. Maintaining this barrier allows occupants more time to escape the building and for the fire to be extinguished.
Do LED lights get hot enough to start a fire?
Incandescent bulbs get hot enough to start contact fire if they are nearby flammable objects, while LED bulbs never reach that temperature. However, improper wiring and overloaded LED light fixtures are often the cause of fires.
Can I use 1mm cable for downlights?
1mm unless exceptionly long runs or other unusuall circumstances need larger. 1mm will be run at less than half its rating in most circumstances, if we consider 1.5 to be needed for lighting, then by the same logic for a 32 amp radial we should select cable suitable for about 60 amps !
Do I need fire rated downlights upstairs?
Depending on the building regulations for a properties location, there’s no requirement for fire rated fans/downlighters in non-fire separating ceilings – e.g. up into a roof space.
Are LED downlights a fire hazard?
LEDs produce the same amount of light as a halogen bulb, but use 80% less energy to do it. They also do not carry a fire risk as they don’t produce a large amount of heat like their halogen counterparts. An LED light unit has a lifespan of 25 years, so you hardly have to replace them.
Can I fit downlights myself?
Fitting downlights is a job that you can do yourself, however like any electrical DIY project if you are not totally sure about what you are doing them you should get a professional electrician to assist you.
Is it bad to have LED lights in your room?
By paying attention to the LED bulb specifications, and taking appropriate precautions and using some basic common sense, you can safely incorporate LED lights in your home without any negative health effects of the “blue light hazard.”