Does Nikon sb600 have TTL?

Does Nikon sb600 have TTL?

The SB-600 offers these major features: i-TTL mode This is a new TTL auto flash mode in the Creative Lighting System. Monitor Preflashes are fired at all times. The subject is correctly exposed by the light from the flash lighting and the exposure is less affected by the ambient light than in the conventional TTL mode.

How do I setup my Nikon SB-600?

How To Setup Nikon SB-600 Flash To Work In Commander Mode

1. On the SB-600, press the ZOOM and “-” buttons simultaneously for 2 seconds to display the Custom Settings mode.
2. Press the ZOOM or MODE button to select wireless mode ON.
3. To set the group and channel, press the ZOOM and “-” buttons simultaneously for 2 seconds.

How do I reset my SB-600?

One good way to remember how to reset the flash is the word “Reset” printed on the back with lines linking the word to the Mode and Power buttons. You hold down those two buttons at the same time for a couple seconds as Mac says above.

How do you remove rust from a camera?

Body

1. Soak a microfiber cloth in denatured alcohol.
2. Wipe the dust from the camera with the microfiber cloth.
3. Attach a small-wire brush wheel to a powered rotary tool.
4. Position the rotary tool over areas of heavy rust.
5. Wipe the rust debris away from the camera body with a cotton swab soaked in denatured alcohol.