How big is a 630 Moco?
Dimensions
| Overall width | Transport 3.5 m 11.5 ft |
|---|---|
| Overall length | Conventional transport With equal angle tongue: 6.2 m 20.5 ft |
| Weight | With urethane roll conditioner 2,273 kg 5,012 lbWith impeller conditioner 2,130 kg 4,696 lb |
| Standard tires | 11L-15 standard 31×13.5L 15 optional |
What is a Discbine mower?
In fact, New Holland coined the term “Discbine,” which has become the popular name that’s loosely used to refer to any disc mower-conditioner, regardless of brand. It’s no surprise, because even in tough conditions, a genuine Discbine disc mower-conditioner swiftly turns heavy crop into fast-drying windrows or swaths.
How wide is a John Deere 630 Moco?
1,854 mm 73
Call Us
| Key Specs: | |
|---|---|
| Width | 1,854 mm 73 in. |
| Diameter | 594 mm 23.4 in. |
| Tines type | V-tines |
| Number of tines | 45 |
How much horsepower does a Discbine need?
The 540-rpm drive and low horsepower requirement mean you can mow and condition your crop for fast drying with as little as 65 PTO horsepower. The H7220 features a chevron-design intermeshing rubber-roll conditioning system, while the H7320 comes with a LeaningEdge™ flail conditioner.
What is the difference between a Haybine and an Discbine?
Haybine is the brand name of the first mower-conditioner. It combined the sickle bar mower and the hay conditioner to promote faster drying hay all in one process. The current versions produced by New Holland are branded the Discbine, since they now feature faster disc mowers.
What is the smallest Discbine?
9’2″ Cut with H7220 or H7320: The smallest models of the Discbine family, the H7220 and H7320, provide a 9′ 2″ cutting width and narrow transport, which is ideal for mowing tight spaces and passing through narrow entrances.
How much HP do you need to run a disc mower?
A new 9 ft cut disc mower/conditioner with rubber rolls from NH calls for 65 HP. But if you move up to the 10 foot cut NH, minimum HP is 80. Keep in mind that these ratings are for ideal conditions (flat land, uniform crop, etc.) and running at pretty high ground speeds.
How fast can you mow with a Discbine?
10 mph – easily achievable by a mid-sized utility tractor with a disc or drum mower, assuming it has the horsepower. 15 mph – Possible with a large tractor (category 2 or larger) and drum mower. Probably too fast to be safe for anything smaller.
What are the specs of a John Deere 630?
2019 JOHN DEERE 630 DISC MOWER CONDITIONER 9’9″ CUT, STEEL ON STEEL ROLLERS, 540 PTO, SIDE PULL, PIN HITCH, GEAR, OVERALL CONDITION IS AN 8, ALONG WITH SKID SHOE, TIN WORK, AND CANVAS. 2019 JOHN DEERE 630, V10 CONDITIONER, 540 PTO, CLEVIS HITCH. Steel roll conditioner 540 rpm pto Clevis hitch 31l x 13.5 tires MT.
How much does a John Deere 630 power steering cost?
Power Steering 1958 John Deere 630, Power Steering, clean sheet metal other than one “booboo” in the grill (see picture), 3-point hitch, 1 set of remotes, motor is loose but we have not tried to start it. Would Make a great restoration or pulling tractor project! $3,950 Reasonable shipping is available a…
Where is the serial number plate on a John Deere 630?
Attachment details Serial number plate on the right side of the 630 tractor frame, below the belt pulley. how to read serial numbers… ©2000-2021 – TractorData.com®.
What does a 630 mower conditioner do?
The 630 Mower-Conditioner delivers a fast, clean cut, field after field, season after season. Skip to main content Search Back Products Finance Parts & Service Locate a Dealer Sign In Locate a Dealer Sign In Search Lawn & Garden Agriculture Construction Commercial Mowing Golf & Sports Turf Forestry Engines and Drivetrain View All Equipment