How do I access my WRT160N router?

How do I access my WRT160N router?

You should be able to access the WRT160N router at the address http://192.168.1.1. If you can’t, it just means the IP address was changed at some point but you’ve forgotten what the new one is.

How do I find my Linksys login?

Access the Linksys router login page Enter 192.168. 1.1 in the address bar of the web browser to open the Linksys router login window. Put the login username and password for your device. Leave the username field blank and enter ‘admin’ in the password field.

How do I reset my Linksys WRT160N?

How can I reset the Linksys WRT160N to factory default settings? Hold down the Reset button on the Linksys WRT160N for about ten (10) seconds. Alternatively, using the web-based setup page, go to Administration tab > Factory Defaults and click the Restore Factory Defaults button.

How do I reset my Linksys WRT160N v3?

What default IP address is used to login to Linksys WRT160N?

What default IP Address, username and password are used to login to the Linksys WRT160N web-based setup page? The default IP Address of a Linksys router is 192.168.1.1. Leave the username blank and then the password is “admin”. 3. How can I reset the Linksys WRT160N to factory default settings?

How do I set up my Linksys router?

This is done by typing the IP address of the router. Linksys sets the default to http://192.168.1.1/ Enter your information. If this is your first time setting it up, you will be asked for your credentials. Leave the username blank and enter “admin” for the password.

How does the Linksys wireless-N broadband router work?

Thank you for choosing the Linksys Wireless-N Broadband Router. The Router lets you access the Internet via a wireless connection or through one of its four switched ports. You can also use the Router to share resources, such as computers. A variety of security features help to protect your data and your privacy while online.

How to configure a wireless router?

Here are some steps to help you configure it. Connect to the router. Use an ethernet cable, and plug your computer into the router. Then turn on the router and connect to it using a web browser such as Internet Explorer or Firefox. This is done by typing the IP address of the router.