How do I change the IP address on my BT Home Hub?

How do I change the IP address on my BT Home Hub?

1. Open up your web browser and type 192.168.1.254 to access the home page of your hub.
2. Select the Settings tab.
3. Select the LAN tab.
4. Click on Private Network.
5. You can now configure your local IP range.
6. Once you save the settings you’ll be prompted to enter your admin password.

How do I manually configure my router IP address?

How to Change Router IP Address

1. Enter your router’s IP address into your favorite web browser.
2. Log in with the default username and password.
3. Click on Setup.
4. Choose Network Settings.
5. Type in the router’s new IP address under Router Settings.
6. Click on Save Setting.

How do I find my hub IP address?

How to find the IP address of your router using Windows

1. Right-click the Windows icon in the bottom-left of your screen, and select “Command Prompt.”
2. In the Command Prompt window, type “IPCONFIG” and press Enter.
3. Find the “Default Gateway” section. The number listed here is your router’s IP address.

Can I change my router’s IP address?

To change the router’s IP address, log in to the router as an administrator. From the control panel, change the IP address to whatever you like. However, this IP address is usually changed when there’s a problem with it. The default IP address should suffice for most situations.

Does hub have IP address?

And hubs? Nope. They don’t have IP addresses because it just doesn’t make sense.

How do I change the IP address of my BT mini hub?

Re: change BT mini hub’s IP address 1 Open a new web browser on a device connected to your BT Mini Hub and type minihub.home in the address bar. This will open the Mini Hub Manager 2 Enter the Admin password. You’ll find the default password on the settings card on the back of your Mini Hub 3 You can then access and make changes to your settings

How do I change the default IP address of the hub?

The default IP address is 192.168.1.254 but you can change that here. You can switch the Hub’s DHCP server on and off. When enabled, the Hub will lease IP addresses automatically when your devices connect. If you want to use your Hub as a modem only and connect another router to use as an access point, then you might want to disable this.

Can I use a range of static IP’s with the hub?

As the smart hub is only for home users it has no functionalty for using a range of static IP’s, if you only jave a single static IP, as long as you configure it to use your business broadband username and password we auto assign the single static IP to the router when it logs in.

Can I port forward from a Smart Hub to a computer?

You would then be able to setup port forwarding from the smart hub to the computer in question if they need to access your computer externaly using the static IP. 09-01-2017 12:44 PM