How do I clear the DC code on my Samsung washer?

How do I clear the DC code on my Samsung washer?

A DC code error on a Samsung washing machine indicates that the washer is unable to spin due to a load imbalance. Correcting a DC error is as simple as redistributing the weight of an existing load, removing items to reduce the overall weight in the washer, or changing suspension rods (or shock absorbers).

Why does my Samsung washing machine keep saying DC?

A dc error code on your Samsung front-load washer means the washer won’t spin because the load is unbalanced. Fixing a dc error code can be as easy as redistributing an unbalanced load or adding a few garments to a small or single-item load.

What do you do when your washing machine shows DC?

Front Loader: Washing machine displays a UE or DC Error Code

1. 1 Turn off and unplug the unit from the power outlet.
2. 2 Check the Shipping Bolts (Make sure they have been removed)
3. 3 Check if the Washing Machine is installed on a level ground.
4. 5 Open the door, take out the clothes, put them back in, and then close the door.

What does BC mean on Samsung washing machine?

Best Gaming TV for Winning. The Frame. Big Screen TVs. All about TV. Q-series Soundbar.

What does DC stand for on Samsung dryer?

Failure of the electronic lock Signs: the door is not blocked or, conversely, it is impossible to open it. In this case, error code dc appears in the Samsung dryer due to problems with the door lock mechanism. The way out is the test by multimeter to make sure the electronic lock is broken and then install a new one.

How do you rebalance a Samsung washer?

How do I run Calibration Mode on my Samsung washing machine?

1. 1 Turn the washing machine off and then on again.
2. 2 Hold down the Temp and Delay End + buttons for 3 seconds until a CB code appears on-screen.
3. 3 Press Start/Pause to run the Calibration cycle.

How do I know if my washer drain pump is bad?

Check the pump pulley by removing the pump from the washer and trying to rotate it by hand. If the pulley doesn’t turn freely and is frozen or stiff, replace it. Also, if the agitator is moving but the tub isn’t, this is a sign the pump is dying. For front-loading washers, do not attempt to open the door mid-cycle.

How do I rebalance my washing machine?

Top-loading washers automatically adjust to level. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it.

Quel est le code d’erreur de la machine à laver?

Ce code d’erreur apparaît si la température de l’eau dépasse 50°C. Si la température de l’eau ne dépasse pas 50°C, le code d’erreur apparaît parce qu’il y a un dysfonctionnement du capteur de température. Dans ce cas, remplacez le chauffe-eau de la machine à laver.

Comment vérifier le code d’erreur du lave-linge?

Vérifie les prises électriques que tu utilises pour ton lave-linge et les connexions du moteur. Assure-toi qu’il n’y a pas trop de linge dans ta machine. En cas de surcharge de la machine, le code d’erreur 3E1 peut apparaître. Retire quelques vêtements du lave-linge et vérifie si le code d’erreur a disparu.

Quels sont les codes erreurs du lave-linge Samsung?

Les code erreurs ue, uc, dc et e4 indiquent un chargement trop important ou une mauvaise répartition du linge qui déséquilibre votre lave-linge Samsung.

Pourquoi le capteur de niveau d’eau de la machine à laver est incorrect?

Le capteur de niveau d’eau de la machine à laver est défectueux. Le raccordement au capteur du niveau d’eau est incorrect. Le tuyau d’alimentation en eau est bouché ou plié. Le tuyau d’eau est sale ou bouché. Un composant de l’alimentation en eau ne fonctionne pas correctement.