How do I clear the error on my Ricoh printer?

How do I clear the error on my Ricoh printer?

To reset the error code, just follow the steps below:

1. Hit the yellow “Clear Modes” key.
2. Press 107 on the number pad.
3. Press and hold the red “Clear Stop” for few seconds until you get a new screen …
4. Press the “Copy SP” Button on the screen display.
5. Press 7807# on the number pad.

How do I clear the memory on my Ricoh printer?

Using Erase All Memory

1. Press [System Settings].
2. Press [Administrator Tools].
3. Press [ Next] 3 times.
4. Press [Change].
5. Press [Erase].

How do you photocopy double sided on a Ricoh printer?

Duplex Copying

1. Press [Dup./Combine/Series].
2. Make sure that [Duplex] is selected. If [Duplex] is not selected, press [Duplex].
3. Select [1 Sided 2 Sided] or [2 Sided 2 Sided]. To change the original or copy orientation, press [Orientation].
4. Press [OK].
5. Place the originals, and then press the [Start] key.

How do I make copies with a printer?

Solution

1. Make sure printer is turned on.
2. Load paper in the rear tray or cassette.
3. Select Copy on the HOME screen.
4. Select Standard copy.
5. Load the original item on the platen glass.
6. Specify settings as necessary.
7. Press Color button for color copying, or Black button for black & white copying.

How do I reset my Ricoh?

Steps

1. On the lower front of the device, flip up the clear cover in front of the red power button.
2. Press and hold the power button for 5 seconds.
3. Allow the device to shut down by itself.
4. Once the printer has fully shut down and the screen has turned off, wait 10 seconds, then press the power button again.

How do you reset the Ricoh code sc542?

Method 1: Rectifying the error by a simple technique

1. In the first step, you must press the key that is yellow in color and denotes clear modes.
2. After that, you must press numbers 107 from your keyboard.
3. Now you need to press as well as hold the button that says clear stop.

How do I clear memory on my copy machine?

Turn off the printer and unplug it from the electrical outlet. Leave the printer unplugged for a minute before reconnecting the power to make sure the memory completely loses power. After plugging the printer in and turning it on, wait until the printer finishes its startup sequence before sending a new print job.

How do I scan double sided Ricoh?

Scanning Two-Sided Originals

1. Place the original, and then select the scan settings you require.
2. Press [Original Feed Type].
3. Specify the original orientation.
4. Press [2 Sided Original].
5. Select [Top to Top] or [Top to Bottom].
6. Select [1st Sheet] or [2nd Sheet].
7. Press [OK].

How do you photocopy front and back on the same page?

About double sided copying

1. From the home screen, select Copy.
2. Place your item face down on the glass.
3. Close the lid.
4. Select 2-Sided Copy.
5. A green tick will appear against the 2-Sided Copy selection.
6. Select Start to scan.
7. The photocopier will scan the first side.