How do I connect my home theater to my cable box and TV?
Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system. Depending on your device, the audio input may be labeled TV INPUT or VIDEO INPUT.
How do I hook up surround sound without HDMI?
Whether it’s your TV, your receiver, or both devices that don’t have HDMI connections available, you can use an RCA cable and/or a converter to connect the two. You’re never more than a few cables away from getting the sound off your Television and into your sound system.
How do I connect my Comcast cable box to my home theater?
Connect the Comcast receiver’s HDMI port to the HDMI port on the surround sound system’s receiver or with a HDMI cable.
- Turn on the Comcast receiver and the surround sound system’s receiver.
- Select the channel that the Comcast receiver is connected to on the surround sound system’s receiver.
Can HDMI carry 5.1 surround sound?
Actually only HDMI can give full 5.1 effect with latest codecs such as Dolby TrueHD, Dolby Digital+, DTS Neo, DTS-HD, etc. SPDIF only supports 5.1 with Dolby Digital and DTS or older codecs such as Dolby Prologic II.
Can I use regular HDMI cable for arc?
Most HDMI cables should work with ARC. Plug one end of the HDMI cable into the ARC-capable HDMI input in your TV and the other into the ARC-capable output on your soundbar or receiver.
How do I get 5.1 on my TV?
You may have to turn the optical output on and turn the TV speakers off. Check the TV manual on how to use the optical output. Select the optical input on the soundbar. You will now get surround sound on anything that plays on the TV if it is surround encoded.
How to connect your home theater to your TV?
For a standard setup, you will connect your TV with the home theater system by using the HDMI port on both devices. These ports will be located at the back of the TV and the back of the controller of the home theater. After you connected the two devices, locate the input button on the remote control of your TV, and sync the right port.
How do you connect a home theater system?
Arrange the speakers in their appropriate locations. Front speakers by the TV and rear speakers behind the sitting area. Link the “Out” jacks on the RCA system to the “In” jacks on the TV, using the appropriate cables. Connect the cable or antenna coaxial cable to the coaxial “In” jack on the RCA home theater system.
How do you connect surround sound to a TV?
Connect the A/V or HDMI cable to the appropriate “In” port on the receiver. Locate the video “Out” port on the receiver. Run an A/V or HDMI cable from this port to the appropriate “In” port on the television. Once connected, you’ll control inputs on the surround sound receiver, switching between sources as needed.
How to connect your home theater system?
Procure an HDMI cable. Make sure that it is long enough; 4.5 meters (14.8 ft) should be good.