How do I console a Cisco router using PuTTY?

How do I console a Cisco router using PuTTY?

1) After downloading PuTTY, connect the console cable with Cisco Router or Swtich, double click putty.exe to execute it. Expand Connection > Serial. Enter the port number inside “Serial line to connect to” text box. The port number is COM4 in below example.

How do I log into a Cisco switch from the console?

Step 1 Locate the console port on the back of the Router/Switch. Step 2 Connect the console (or rollover) cable to the console port on the Router/Switch. Step 3 Use the correct adapter to connect the other end of the cable to your terminal or PC.

How do I log into my Cisco router from the console?

Access Router Command Line Interface

1. Under Category, choose Session.
2. Under Connection type, choose Serial.
3. In the Serial line, enter the COM port on your laptop that is connected to the console port on your router, using the console cable.
4. Click Open.

How do I connect to putty?

How to Connect PuTTY

1. Launch the PuTTY SSH client, then enter your server’s SSH IP and SSH Port. Click the Open button to proceed.
2. A login as: message will pop-up and asks you to enter your SSH username. For VPS users, this is usually root.
3. Type your SSH password and press Enter again.

How do I navigate in putty?

Just type “pwd” and hit enter. cd: Now, you are at a location and you want to navigate to another. Type “cd /location” and you will reach that location. It stands for “change directory”.

How do I open a Cisco switch in putty?

Procedure:

1. run sudo putty.
2. Click on Serial for the Connection Type:
3. Set the serial line to /dev/ttyUSB0.
4. Click on Keyboard, then set backspace key to Control-H.
5. Click on Session . Click on Default Settings. Click Save .
6. Click Open .

How do I open PuTTY configuration?

Select Start > Programs > PuTTY > PuTTY. The PuTTY Configuration window opens. Select the name of your saved PuTTY session and click Load. Click Open.

How do you console into Cisco switch?

Connect the RJ45 jack of your console cable to the console port of your Cisco Router or Switch. Connect the other end to the Serial port of your computer. Refer the following link to know more about console port and console cable. Refer the following link if a Serial Port is not available in your computer.

What is the Cisco attendant console?

Cisco Unified Communications Manager Attendant Console is a software program developed by Cisco Systems. The most common release is 6.1.0, with over 98% of all installations currently using this version. The software is designed to connect to the Internet and adds a Windows Firewall exception in order to do so without being interfered with.

What is the use of console port in Cisco switches?

The console port is for out of band management & configuration. The dedicated management port is for remote out of band management & configuration. I have a Cisco 2960s switch that I did the basic configuration on.

What is a Cisco console port?

Every Cisco router or a switch has a console port (also known as the management port) on its back side. Console port is used to connect a computer directly to a router or switch and manage the router or switch since there is no display device for a router or switch .