How do I create a raid on my HP ProLiant server?

How do I create a raid on my HP ProLiant server?

Procedure

1. Start or restart the HP server.
2. At boot time, press F8 to enter the Integrated Lights-Out 2 setup.
3. Provide credentials at the login prompt.
4. Press Ctrl+S to open the Intel Boot Agent Setup Menu.
5. Press F8 to open the ROM Array Configuration menu.
6. From the Main Menu, select Create Logical Drive and press Enter.

How do I find RAID configuration on HP server?

You can also reboot and view the array configuration from the BIOS utility or by launching the F10 Intelligent Provisioning menu. If you have access to the server’s ILO4 interface, you can get the array configuration from that by clicking on the “Storage” menu.

How do I enable logical drive in HP Array?

Logical Drive can be re-enabled in following ways: 1. Boot Server with SmartStart CD, open ACU, and re-enable logical drive. 2. Get into BIOS while booting the server, choose the Logical Drive and press F1 to re-enable the logical drive.

How do I setup my HP Micro server?

Setup Overview

1. Before you begin.
2. Component identification.
3. Install hardware options.
4. Connect peripheral devices.
5. Connect the Ethernet cable.
6. Power on and select boot options.
7. Perform the initial system setup.
8. Use the MicroServer with the HP PS1810-8G switch (optional)

How do I setup RAID 10?

Configuring RAID in Windows 10

1. Type or paste ‘Storage Spaces’ into Search Windows.
2. Select Create a new pool and storage space.
3. Select the RAID type under Resiliency by selecting the drop down menu.
4. Set the drive size under Size if necessary.
5. Select Create storage space.

How do I get to HP array Configuration Utility?

Open the browser on the remote server. The System Management Home Page opens. 3. Click Array Configuration Utility on the left-hand side of the screen.

How do I check RAID status on HP Proliant server?

To check the status of an HP RAID you need to use hpacucli (as root). If this isn’t installed, you can install it using apt-get install hpacucli ia32-libs on Debian/Ubuntu systems.

How do I access HP Smart Array Configuration Utility?

ACU is now available as an embedded utility, starting with HP ProLiant Gen8 servers. To access ACU, use one of the following methods: If an optional controller is not installed, press F10 during boot. If an optional controller is installed, when the system recognizes the controller during POST, press F5.

How do you’re enable the failed RAID in HP hardware?

Reset the system and take its console from ILO.

1. Keep an eye on the monitor and when below screen appears, press F10 to enter into Intelligent Provisioning.
2. Select the option with error mark i. e.
3. As soon as you select this logical drive, there is an option on right side screen that says “Re-enable Failed Logical Drive”.

What is a HP ProLiant MicroServer?

HP’s ProLiant MicroServer is a server designed for small and SOHO businesses that may be ready to move from a peer–to-peer network (all clients act as equals and share resources) to a centrally managed network.

What is HP Intelligent Provisioning?

Intelligent Provisioning is a server assistance tool that is simple to use, offers fast deployment, and provides flexibility on how to deploy servers. This fully integrated system and OS configuration tool reduces server installation and set-up steps to deploy servers faster.

How to configure raid on hp microserver Gen8?

In this article will present how to configure RAID on HP Microserver Gen8. I have in hand the following configuration: 1 x Samsung Pro 840 128Gb. To configure RAID follow the next steps: Make sure the ILO network cable is connected to your router. Identify the IP assigned to ILO interface by your router.

How to configure raid on Samsung pro 840 128GB?

1 x Samsung Pro 840 128Gb. To configure RAID follow the next steps: Make sure the ILO network cable is connected to your router. Identify the IP assigned to ILO interface by your router. How to find out the IP depends on the router model.

How to create an array in HP Smart Storage administrator (SSA)?

Click on HP Smart Storage Administrator (SSA). Select the Array Controller ( Dynamic Smart Array B120i RAID) and then click Configure button under Actions section. Click on Create Array under Actions section. Select the drive you want to add to the array (my case 2 WD RED 3Tb) and then click Create Array.

How to configure dynamic smart array b120i raid for WD red 3TB?

Select the Array Controller ( Dynamic Smart Array B120i RAID) and then click Configure button under Actions section. Click on Create Array under Actions section. Select the drive you want to add to the array (my case 2 WD RED 3Tb) and then click Create Array. In this step, we need to select the RAID options.