How do I fix E03 error on my Canon printer?

How do I fix E03 error on my Canon printer?

Turn the machine off, then unplug the power cord….Paper Is Jammed inside the Machine

1. Make sure that the jammed paper is not under the FINE cartridge holder.
2. Hold the jammed paper with your hands.
3. Pull the paper slowly not to tear it, then pull the paper out.
4. Make sure that all the jammed paper is removed.

How do I fix error code b203 canon?

How can I fix Canon printer error b203?

1. Perform a power cycle. At first, turn off your Canon printer.
2. Check your ink cartridge. First of all, turn off your printer and make sure all the ink cartridges are full.
3. Rule out a potentially bad network connection.
4. Remove paper jam.
5. Update drivers.
6. Use Windows Troubleshooter.

How do I reset my Canon mp287 printer?

Entering Service Mode

1. Turn the printer off (ON/OFF)
2. Press and hold the STOP/RESET.
3. Press the Power ON/OFF.
4. Remove the STOP/RESET (Note: power ON/OFF is still on hold.
5. Press the STOP/RESET 6x and release the STOP/RESET and Power ON/OFF.
6. The entered the Service Mode, all LED will stop blinking.

Why does my Canon printer say p2?

This error typically indicates one of the inks is not inserted properly. Check out the link below for a few things you can try. Hope this helps!

What is B203?

Canon printer error: “Error B203” This error typically arises when the users try to execute a printing command while the printer is unable to proceed it properly. The cause of this error is related to simple internal issues of the printer, such as a damaged printhead or a recent firmware update.

What does P2 mean on Canon printer?

P0=After removing a paper jam, another sheet of paper is still jammed in the printer. P1=Paper jam. P2=Two sheets of paper are jammed.